3Pcs 2.1A 5V Charge/Discharge(Boost) Module 3.7V Lithium D

₦ 13,584

₦ 24,19244%

2 units left

+ shipping from ₦ 3,877 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

2offers starting from₦ 13,584

See More Offers

Promotions

Call 07006000000 To Place Your Order Need extra money? Loan up to N500,000 on the JumiaPay Android app. Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees ₦ 3,877

Ready for pickup between 27 June and 01 July if you place your order within the next 18hrs 46mins

Door Delivery

Delivery Fees ₦ 4,877

Ready for delivery between 27 June and 01 July if you place your order within the next 18hrs 46mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

None

Seller Information

Williami

92%Seller Score

6 Followers

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Good

Compare Offers

₦ 14,272

Sold by: Sophiai | Seller Score: 90%

Warranty:

None

Product details

Detailed Information About The Product:

Name：3Pcs 2.1A 5V Charge/Discharge(Boost)/Battery Protection/Indicator Module 3.7V Lithium DD06CVSA
4 in 1 charge/Discharger(boost)/battery protection/Battery level indicator modules
DD06CVSA is a multifunctional 3.7V/4.2V Mobile Power Diy module,3 in 1 Function: charge,discharge and battery protection.
It is very suitable for DIY mobile power.
Charge voltage: DC 4.5V-5.2V (If the power supply is 5.2V-5.5V, please parallel diodes (eg SS34 SMB))
Charging current: 0-2.1A; Charge quiescent current: 100uA; Full charge voltage: 4.2V+-1%.; Discharge current: 0-3.5A;; Discharge quiescent current: 50uA; Discharge conversion efficiency: maximum 96%; Output voltage: 5V; Output current: 0-2.1A; Operating ambient temperature: -20℃ to +85℃

Comes with battery protection, do not need battery protection board
(if your battery comes with a protective board, it does not matter)
Overcurrent protection(OCP)
Overvoltage protection(OVP)
Short circuit protection(SCP)
Over temperature protection(OTP)
Pin description:
1 VIN : Charging port +
2 GND : Charging port -
3 BAT : Battery port +
4 GND : Battery port -
5 GND : Output port -
6 VOUT: Output port +
7 KEY : Output trigger port(Low pulse trigger)
1. In discharge mode(In the charging mode,the KEY function is invalid),
the KEY Trigger once,turn on the output;Continuous trigger twice: turn off the output.
2. When the load access, it will automatically turn on the output.
But if the load is less than 50MA, the output will be turned off after 30 seconds
NOTE:
If the output load current is less than 50MA, turn off the output after 30 seconds.
If the output load current is greater than 50MA,continuous turn on the output
This module is not suitable for uninterruptible power supply(ups),If you need the UPS module, Click here to buy
colour: green
Material: PCB
Size: 35x15mm

Package Contents:
3 x Charge discharge module

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.