This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomePhones & TabletsMobile Phone AccessoriesReplacement Parts & Tools1800W ZVS Induction Heating Board Module Flyback Driver Heat
/product/55/5456604/1.jpg?8467)
/product/55/5456604/2.jpg?8467)
/product/55/5456604/3.jpg?8467)
/product/55/5456604/4.jpg?8467)
/product/55/5456604/5.jpg?8467)
/product/55/5456604/6.jpg?8467)
/product/55/5456604/7.jpg?8467)
/product/55/5456604/8.jpg?8467)
Share this product
₦ 89,340
₦ 169,75047%
In stock
+ shipping from ₦ 16,385 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)4offers starting from₦ 89,340
See More OffersPromotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 16,385
Ready for pickup between 27 June and 01 July if you place your order within the next 13hrs 18mins
Door Delivery
Delivery Fees ₦ 17,345
Ready for delivery between 27 June and 01 July if you place your order within the next 13hrs 18mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
YoMandy
84%Seller Score
529 Followers
Seller Performance
Shipping speed: Good
Quality Score: Excellent
Customer Rating: Average
Compare Offers
See all offersProduct details
Description:
1. This product has a maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect.
2. 12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation.
3. Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient.
4. With a cooling fan interface, can also for Tesla discharge, generator voltage inverter, etc.
5. It is recommended not to exceed 48V 35A to prevent accidents and damage.
Specifications:
Input Voltage: 12V-48V (Recommendation: above 36V)
Power Requirments: Less than 12V >=10A, More than 15V >=15A
Maximum Power: 1800W
Maximum Current: 40A
Heater Inner Ring: 70mm / 2.8in
Size: Approx.
18 x 13 x 8 cm / 7.1 x 5.1 x 3.1in
Weight: Approx. 1052g
Package Included:
1 x PCB Board
1 x Copper Tube
Note:
1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.
2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.
3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.
4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.
5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.
6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.
7. It is recommended to use a 36V 20A power supply. Below 12V is very
dangerous.
8. Please note that the new type and old type of this product will be sent
randomly, and make sure you will not mind before ordering.
.
1. This product has a maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect.
2. 12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation.
3. Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient.
4. With a cooling fan interface, can also for Tesla discharge, generator voltage inverter, etc.
5. It is recommended not to exceed 48V 35A to prevent accidents and damage.
Specifications:
Input Voltage: 12V-48V (Recommendation: above 36V)
Power Requirments: Less than 12V >=10A, More than 15V >=15A
Maximum Power: 1800W
Maximum Current: 40A
Heater Inner Ring: 70mm / 2.8in
Size: Approx.
18 x 13 x 8 cm / 7.1 x 5.1 x 3.1in
Weight: Approx. 1052g
Package Included:
1 x PCB Board
1 x Copper Tube
Note:
1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.
2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.
3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.
4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.
5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.
6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.
7. It is recommended to use a 36V 20A power supply. Below 12V is very
dangerous.
8. Please note that the new type and old type of this product will be sent
randomly, and make sure you will not mind before ordering.
.
Specifications
Key Features
- This product has a maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect
- 12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation
- Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient
- With a cooling fan interface, can also do for Tesla discharge, generator voltage inverter, etc
- It is recommended not to exceed 48V 35A to prevent accidents and damage
What’s in the box
1 x PCB Board
1 x Copper Tube
Note:
1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.
2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.
3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.
4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.
5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.
6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.
7. It is recommended to use a 36V 20A power supply. Below 12V is very
dangerous.
8. Please note that the new type and old type of this product will be sent
randomly, and make sure you will not mind before ordering.
.
1 x Copper Tube
Note:
1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.
2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.
3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.
4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.
5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.
6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.
7. It is recommended to use a 36V 20A power supply. Below 12V is very
dangerous.
8. Please note that the new type and old type of this product will be sent
randomly, and make sure you will not mind before ordering.
.
Specifications
- SKU: GE779EA7J7XA4NAFAMZ
- Model: N/A
- Size (L x W x H cm): 30x13x12
- Weight (kg): 1.122
- Color: N/A
- Main Material: Plastic + Metal
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/55/5456604/1.jpg?8467)
1800W ZVS Induction Heating Board Module Flyback Driver Heat
₦ 89,340
₦ 169,75047%
Questions about this product?
