Winner Transfer Opaque Multi-function Transfer Paper 5sheets Opaque Heat Printable Vinyl For T Shirt

Search TransOurDream Discover More Transfer Papers

IRON

1.Set iron to Cotton/Jeans Setting and TURN OFF steam.

2.Apply FIRM, EVEN and HEAVY pressure and iron each area of the image for 5 seconds.

3.Circularly press and iron the image. (A4 size image, press 3-5 minutes. 1/2 A4 size image, press 2-3 minutes. 1/4 A4 size image, press 1.5-2 minutes )

4. Ensure that all areas of the image is ironed, especially the corners and edges.

NOTES:1 Apply ENOUGH pressure on the transfer as more pressure will help transfer all of the print onto the fabric.2 INSUFFICIENT PRESSURE and IRONING TIME would achieve poor transfer result - the transferred image may peel off.

 

EASY PRESS

Temperature and Time may vary based on easy heat press type, image size and fabrics. Suggest you do a test before transfer onto t-shirts.

For FULL SHEET image, heat press the whole image slowly from one side to the other side.

Apply HEAVY pressure on each area of the image for 10 seconds, circularly iron the whole image 4 times. At last, heat press each corner of the image for 10~20 seconds.

NOTES:The ironing time is adjusted according to your fabric as shown above.

If the corner peels off, cover the teflon paper(in the pack) and heat press it for another 10~20 seconds.

 

HEAT PRESS MACHINE

Set Temperature to 170°.Set Time to 10 seconds. Apply MEDIUM pressure.

 

Step 1: PRINT

Print your design on the BLANK Side of transfer paper.1 Inkjet Printer Settings:Set Paper Type to Plain Paper or Photo Paper.Set Printing Quality to Photo or High Quality Photo.No MIRROR Printing.2 Laserjet Printer Settings:Set Paper Type to Label Paper.Choose 110g-128g, No MIRROR Printing.

 

Step 2: CUT & PEEL

1 Cut out your design: Use scissors or cutting machine, such as Cricut, Silhouette and more.2 Peel your design from the backing LOGO paper. NOTES: Transfer Paper is composed of two layers - the BLANK film and the backing LOGO paper.

 

Step 3: PLACE

1 Remove Creases: Place your t-shirt on a SOLID surface (Don’t use ironing board as it’s too soft) and use your ironing tool to smooth out creases on t-shirt.

2 Place your design facing UPWARD onto appropriate position of T-shirt.

3 Cover it with Teflon Paper (included in the pack). NOTES: The teflon paper both sides can be used.

 

Step 4: TRANSFER

 HEAT PRESS machine :Set Temperature to 170℃.Set Time to 10 seconds. Apply MEDIUM pressure.

 

Step 5: REMOVE TEFLON PAPER

 After ironing done, peel off teflon paper in a quick and smooth action.

 

Step 6: DONE  

Congratulations! Your DIY image transfer has been done.

NOTES: Recommend NOT using printers with thermal printing technology. They will heat the transfer paper and may separate the film and the backing during printing.

 

WASHING  INSTRUTIONS :

1.Don’t wash within 48 hours after transfer.2.Wash the garment before wearing.3.Don’t use bleach or alkaline detergent.4.Turn the garment inside out when washing.5.Don’t soak to wash.6.Full spin cycle, cold water washing.7.No delicate washing.8.No tumble dry.9.Remove garment promptly after washing, colors may bleed if left wet too long.10.Unfold the transferred image, hang to dry naturally.

 

STORAGE INSTRUCTIONS:

1.Keep the image facing outside when fold the garment.2.Store the garment in a dry and cool place.3.Keep the unused transfer paper sealed and preserved.