OUTBACK POWER Outback Communication Manager, 4 Ports, HUB-4 (Ul1741-SA)

Outback Power HUB-4 Communication Manager

The HUB-4 Communication Manager allows the MATE to control and monitor a maximum of four OutBack products. The inverter/chargers can be operated in a stacked or independent configuration, and OutBack MX60 PV MPPT charge controllers can also be used on any of the four available ports of the HUB-4. Future OutBack products will also be compatible with the HUB-4. The HUB-4 manages both the inter-inverter communications and the MATE-inverter communication. The HUB-4 also can be used with the X-240 autotransformer when series stacked to allow full surge and continuous AC load capacity of each FX to be available on either of the 120 VAC output circuits. When two or more FX inverters are stacked in a parallel or series configuration, the system automatically turns off any excess slave inverters to save power and maximize conversion efficiency. This power save system is fully automatic and works with or without the MATE connected to the system. One MATE system controller and display can be connected to the HUB. The maximum distance from the HUB-4 to the power conversion product should be under 10 feet. OutBack includes two three foot long CAT5 cables standard with the HUB-4.