multi-functional wall power socket

*multi-functional wall power socket** (often referred to as a combination USB wall outlet or a universal travel wall socket).

Because this is a generic hardware component rather than a specific branded product, a universal manual is not available. However, based on the design visible in the image, here is the standard information for this type of electrical device.

---

### **Product Overview**

This is a wall-mounted electrical interface that combines a standard multi-standard AC outlet with integrated USB charging ports (USB-A and USB-C). It is designed to provide both high-voltage power for appliances and low-voltage DC power for mobile devices.

### **Feature Highlights**

* **Dual USB Charging:** Includes one USB-A port and one USB-C port, allowing for the direct charging of smartphones, tablets, and other USB-powered electronics without needing a separate brick adapter.
* **Integrated Power Switch:** Features a rocker switch to manually toggle power to the AC outlet, providing a safety/energy-saving feature to cut off current when not in use.
* **Universal AC Port:** The outlet design is universal, intended to accept various plug types from different regions.
* **Modern Aesthetic:** Features a high-gloss, sleek black finish, typical of modern "smart" or luxury interior electrical fixtures.

### **General Instructions**

1. **Installation (Warning: Professional Only):** Electrical work carries a risk of shock. This device should only be installed by a licensed electrician. Ensure the main circuit breaker is turned off before attempting any wiring.
2. **Wiring:** The back of the unit will have terminals for Line (L), Neutral (N), and Earth/Ground (E). Ensure these are connected strictly according to locals eletricals codes.
3. **Operation:**
* Plug your appliance into the lower section.
* Use the side rocker switch to turn the AC outlet "ON" or "OFF."
* The USB ports typically provide continuous power as long as the mains are live, though some models may require the main switch to be "ON."

### **Maintenance**

* **Cleaning:** Use only a soft, dry, or slightly damp microfiber cloth to wipe the surface. Do not use abrasive cleaners, bleach, or harsh chemicals, as they will scratch or dull the glossy finish.
* **Inspection:** Periodically check the socket for signs of overheating (discoloration or a burnt smell). If the plastic housing appears warped or melted, the device must be replaced immediately.
* **Connectivity:** If the USB ports stop charging, ensure the cables you are using are functional. If the outlet remains dead after confirming the circuit breaker is on, the internal fuse or transformer may have failed; do not attempt to repair the internal electronics—replace the entire unit.

***Safety Note:** Always ensure the total load (sum of power consumption from the AC outlet and USB ports) does not exceed the maximum wattage/amperage rating printed on the back of the socket or its original packaging.*

---