/product/39/9603233/1.jpg?5686)
Share this product
₦ 3,000
9 units left
+ shipping from ₦ 750 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Choose your location
Pickup Station
Delivery Fees ₦ 750
Ready for pickup between 18 September and 21 September if you place your order within the next 10hrs 9mins
Door Delivery
Delivery Fees ₦ 1,550
Ready for delivery between 18 September and 21 September if you place your order within the next 10hrs 9mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
LVK
92%Seller Score
218 Followers
Seller Performance
Shipping speed: Good
Quality Score: Excellent
Customer Rating: Average
Cancellation Rate: Excellent
Product details
The KY-036 Metal Touch Sensor Module is an analog/digital sensor that uses a transistor to detect changes in electrical conductivity. When the transistor is touched with a finger, the conductivity changes and the module emits a digital and analog signal.
The digital output can be used a switch that changes state when touched. The analog output can measure the intensity of the touch. The detection threshold can be regulated using the on-board potentiometer.
Compatible with popular microcontroller boards like Arduino, ESP32, ESP8266 and Raspberry.
Specifications:This module consists of a transistor to detect touch, an LM393 differential comparator to control the digital output, a 3296W potentiometer to adjust the detection threshold, 6 current limiting resistors, 2 indicator LEDs and 4 male header pins. The module features analog and digital outputs.
G GND
+ 5V
D0 Pin 7
The digital output can be used a switch that changes state when touched. The analog output can measure the intensity of the touch. The detection threshold can be regulated using the on-board potentiometer.
Compatible with popular microcontroller boards like Arduino, ESP32, ESP8266 and Raspberry.
Specifications:This module consists of a transistor to detect touch, an LM393 differential comparator to control the digital output, a 3296W potentiometer to adjust the detection threshold, 6 current limiting resistors, 2 indicator LEDs and 4 male header pins. The module features analog and digital outputs.
- Operating voltage: 3.3V ~ 5.5V
- Board Dimensions: 15mm x 36mm [0.6in x 1.4in]
- Connect the module’s analog output (A0) to pin A0 on the Arduino, and the digital output (D0) to pin 7.
- Connect the module’s power pin (+) and ground (G) to 5V and GND respectively.
G GND
+ 5V
D0 Pin 7
Specifications
Key Features
Specifications:This module consists of a transistor to detect touch, an LM393 differential comparator to control the digital output, a 3296W potentiometer to adjust the detection threshold, 6 current limiting resistors, 2 indicator LEDs and 4 male header pins. The module features analog and digital outputs.
G GND
+ 5V
D0 Pin 7
- Operating voltage: 3.3V ~ 5.5V
- Board Dimensions: 15mm x 36mm [0.6in x 1.4in]
- Connect the module’s analog output (A0) to pin A0 on the Arduino, and the digital output (D0) to pin 7.
- Connect the module’s power pin (+) and ground (G) to 5V and GND respectively.
G GND
+ 5V
D0 Pin 7
Specifications
- SKU: GE779EA5MEJ2BNAFAMZ
- Product Line: LVK
- Weight (kg): 0.1
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
Related results
Computer lampsComputer speakerphoneComputer paperComputer bracketComputer skinComputer and printer hubComputer gps trackerHuawei computersComputer DVDsComputer cable to internetComputer coolerComputer remoteComputer holderInverter computerDesktop computer with BluetoothMale accessoriesSpeaker microphone for the computerBike computerDesktop charger for HP computerModem for computerHeadset accessories206 accessoriesSecurity accessoriesKpop accessoriesCondenser conference computer microphoneTailors accessoriesSaloon accessoriesOld computerElectricity accessories installation accessoriesUK used laptop computers
/product/39/9603233/1.jpg?5686)
KY-036 Metal Touch Sensor
₦ 3,000
Questions about this product?
