Intronics MAXIMUM POWER POINT TRACKING SOLAR BATTERY CHARGE CONTROLLER

Brand new 75 amp MPPT solar panel battery charge controller. This is the next generation of Intronics Power solar charge controllers. It is an upgraded version of the Intronics Power MPPT75HV charge controller. It includes hardware and firmware enhancements to better track the panel maximum power point as well as manage 12, 24, 36 or 48 volt (nominal) off grid solar systems.
This controller was designed with the latest in digitally controlled switching power supply technology for world class efficiency and reliability. It is intended for off grid applications using high voltage industrial style panels. Most such panels are around 200-350 watts, and have a maximum power point of around 40-50 volts. Using high voltage panels like these allows for using smaller diameter wire for the runs to the panel, and much lower power losses in the cable. The MPPT charge controller operates the panel at its most efficient power point, and delivers the maximum power to the battery bank. For example, if the panel maximum power is at 45 volts 10 amps (450 watts), and the battery is at 12.5 volts, the controller will deliver approximately 34.6 amps (450 watts X .96).
It can also be used with lower voltage panels, and will deliver up to 30% more energy to the battery bank than a standard PWM or shunt controller. With a 12 volt system it is good for up to 1050 watts (14V charge voltage). In a 24V system, up to 2100 watts (28V charge voltage), 36V system 3150 watts, and for a 48V system, up to 4200 watts.. You can safely connect it to an array panels of any power rating, as it will automatically limit its output to 78 amps.

Made in USA by Intronics Power (Norwood, MA)
See detailed manual on web site www.intronicspower.com
Comes with a one year factory warranty.