Habotest AC/ Digital Clamp Meter True-RMS Multimeter

This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/ voltage, AC/ current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key.



Features:

CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC/ current, AC/ voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.

WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.

LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.

MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.

SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.

AUTO-OFF: Auto off within 15 minutes if there is no operation, helps conserve the battery.

MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.



Note:

*MUST read the user manual carefully before use for safety.

*Battery not included.



Parameters:

Display: 6000 count

Clamp Opening Size: 40mm

Auto-off: approx. 15 minutes

Max. Voltage Between Terminals and Earth Ground: AC750V or 1000V
Range Resolution Accuracy Current (MAX current: 1000A) 60A 0.01A ±(2.5%reading+8) 600A 0.1A 1000A 1A AC Current (MAX current: 1000A, True RMS) Frequency range: 0.1~600A: 40Hz~400Hz 600~1000A: 40Hz~60Hz 60A 0.01A ±(2.5%reading+8) VFD: ±(5.0%reading+10) INRUSH: ±(5.0%reading+10) 600A 0.1A 1000A 1A Voltage Input impedance: 10MΩ(LoZ: 300kΩ) Overload protection: AC750V/DC1000V Maximum input voltage: AC750V/DC1000V 600mV 0.1mV ±(0.5%reading+5) 6V 0.001V 60V 0.01V 600V 0.1V 1000V 1V ±(0.8%reading+5) AC Voltage Input impedance: 10MΩ(LoZ: 300kΩ) Overload protection: AC750V/DC1000V Maximum input voltage: AC750V/DC1000V Frequency range: 40Hz~1kHz, True RMS 600mV 0.1mV ±(0.8%reading+5) 6V 0.001V 60V 0.01V 600V 0.1V 750V 1V ±(1.0%reading+5) VFD(750V) 0.1V ±(2.0%reading+5) Resistance Overload protection: 250V 600Ω 0.1Ω ±(1.0%reading+5) 6kΩ 0.001kΩ 60kΩ 0.01kΩ 600kΩ 0.1kΩ 6MΩ 0.001MΩ 60MΩ 0.01MΩ Diode It displays the approximate forward voltage value of the diode. Forward current is about 1.5mA; Reverse voltage is about 3V; Overload protection: 250V Continuity

Specifications

Key Features

• CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC/ current, AC/ voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.
• WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
• LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.
• MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.
• SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.
• AUTO-OFF: Auto off within 15 minutes if there is no operation, helps conserve the battery.

What’s in the box

1 x Digital Clamp Meter,1 x Thermocouple,2 x Test Lead,1 x User Manual(English),

Specifications

• SKU: HA912IP4O1R7JNAFAMZ
• Model: N/A
• Production Country: China
• Size (L x W x H cm): 27.50×13.50×5.50
• Weight (kg): 0.64
• Color: Black and Red

Verified Customer Feedback

Customers who have bought this product have not yet posted comments