WOYO CTB007 OBD tools OBD2 Tester for 16Pin Voltage Diagnosis Scanner

1.CAN Tester Box is a CAN Bus circuit tester compatible with 12 and 24 volt systems;
2.Testing DLC (OBD port) if any error before connecting connecting other diagnostic equipment to DLC, such as pin short circuit and polarity reverse connection;
3.Real-time display of communication signals ( such as communication protocol signals ) on the allocated pins which can quickly locate faults and rep the voltage measurement function of digital multi-meter;
4.Fastly connect 16 pins during vehicle maintenance diagnosis;
5.Monitoring input voltage of OBD when burning module, high and low voltage alarm;

It can connect to other diagnostic tool, for example, multimeter, oscilloscope, diagnostic scanner, etc. Let you take it easy to check the problem of the car;
Quickly confirm which pin has problem.
CAN Tester Box is a CAN Bus circuit tester compatible with 12 and 24 volt systems;
Testing DLC (OBD port) if any error before connecting connecting other diagnostic equipment to DLC, such as pin short circuit and polarity reverse connection;
Real-time display of communication signals ( such as communication protocol signals ) on the allocated pins which can quickly locate faults and rep the voltage measurement function of digital multi-meter ;
Fastly connect 16 pins during vehicle maintenance diagnosis;
Monitoring input voltage of OBD when burning module, high and low voltage alarm.
Specifications:
Input Voltage : 9.0-32.0VDC
Maximum Load : 2.0A
Resolution : 0.1V
Overload Protection : Yes, PTC Fuse (Self-Healing)
Reverse Polarity Protection : Yes,LED On Pin 4&5 Turn Red
Protocol Standard : PWM(J1850),VPW(J1850),ISO 9141-2,DIS/ISO 14230-4,CAN(J-2284)
Operating Temperature : 0℃-50℃,Humidity less than 70%
Banana Socket : 16P x 2.0 mm
OBD Cable Length : 70 cm ( 27.5inch )
Color:As Shown
Material: ABS

Package Contents:
1 x Diagnosis Scanner

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.