Wired / Wireless SD-568 Sunding Bike Computers LCD Digital Display Bicycle Odometer Cycling Riding Accessories Tool

Store Followers have extra discountsSunding Cycle Wired Large Screen Bike Computers LCD Digital Display Bicycle Odometer Cycling Riding Acceories Tool

About product

Tire circumference setting function1. Set according to the circumference of the bicycle tire.Speed function:2. Instantaneous driving speed SPD3. Maximum driving speed MXS4. Average driving speed AVS5. Compared with the average speed, ▲▼Wheel revolution function6. Number of laps per minute of wheel rotation (this new product does not have this feature)Mileage function (imperial/metric switch)7. Total mileage ODO8. Single driving distance DST9. The total mileage initial value is set. If the battery is repd, the pre-repment value can be set to the initial value.Time function10. Driving DurationTM11. Clo(12 hours / 24 hours switch) CLKAutomatic loop display function13. ODO, DST, MXS, AVS, TM, R, CLK functions, one content automatically scrolls every 4 seconds SCANDriving data sampling function14. Instant data sampling for profeional testing with DST TM AVS MXSPower saving functionIf there is no input signal within 15.30 seconds, it will automatically enter the power saving mode and only display the time.Maintenance reminder function16. When the total mileage reaches the set maintenance value, the wrench symbol is displayed to remind the maintenance bicycle.water-proof17. Has a good waterproof function.

Installation tips:

1. Mount the meter head to the handlebar;2, the AG13 on battery is loaded into the battery slot on the baof the meter3, initialization code table data, generally only need to set the tire circumference a can be used normally;3. Insert the meter head into the head chute;4. Install the sensor on the front fork, and the sensor head is facing the spoke;5. The induction is mounted on the spoke and is aligned with the induction head, which is about 3-5 mm apart;6. Secure the cable with a nylon cable tie;7. Cheif the above header holder, sensor and induction are installed firmly. This package comes with the neceary rubber gaskets and detailed Chinese and English instructions to ensure your installation is succeful.8, more functions, please refer to the manual setting

Setting function

1. Install the battery and the battery slot on the baof the meter;2. Pre the right on within 15 seconds to enter the circumference of the tire;3. Refer to the wheel diameter and perimeter comparison table. For example, the circumference of the 28 model wheel is 224cm. Pre the left on to set the three digits to 224 (the default is 208cm).4. Right clito confirm;5. For more functions, please refer to the manual settings.

The package includes:

Bike computer * 1cable ties * 1English manual *1 *1Pad bracket *1

SD-568C wirele