Superbat F Jack To 3.5mm 18-inch Plug Mono Coaxial Cable Converter Adapter For FM Wave Antenna

The cable core is composed of a plurality of mutually insulated wires or conductors, and the communication line is provided with a sealing sheath on the outside. Some are also equipped with an outer sheath outside the sheath. There are various laying methods such as overhead, direct burial, pipeline and underwater. According to the structure, it is divided into symmetrical, coaxial and integrated cables; according to functions, it is divided into field and permanent cables (underground and submarine cables). The communication cable has a wider transmission frequency band, a larger communication capacity, and less external interference, but it is not easy to repair. It can transmit telephone calls, telegrams, data and images, etc. Mainly used to transmit audio, 150kHZ and below analog signals and 2048kbit/s and below digital signals. Under certain conditions, it can also be used to transmit digital signals above 2048kbit/s. It is suitable for overhead or pipeline laying lines in urban, suburban and local areas, and can also be directly buried. Product name: Communication cable Model: HYA, HYAC, HYAT, HYA53, HYAT53, HYV, HYA23, HYAT23, HYA22, HYAT339. HYA type urban communication cable adopts full chromatographic insulation and aluminum-plastic composite sheath (that is, the longitudinal shielding aluminum tape of the cable is bonded to the sheath to form a sealing sheath), which has the characteristics of superior electrical performance and convenient construction.

Superbat F Jack to 3.5mm 1/8-inch Plug Mono Coaxial Cable Converter Adapter for FM Wave Antenna

Specification:

F Female to 3.5mm 1/8-inch Male Plug Mono Coaxial Cable Converter Adapter for FM Wave Antenna Used to convert a F male type coaxial cable or Antenna to the 3.5mm mono male plug

Compability:

Works great with newer Wave III IV and DAB receiver or Tabtop which require the 3.5mm connection. Note:It doesn't work with earlier WAVE which has a 75 ohm antenna connection

EASY INSTALL:

This connector is easy to install and disassemble.Just screw your coaxial cable or Antenna on the F-PIN female jack, then attach the 3.5mm plug to your radio

HIGH QUALITY:

Connectors are built with nickel-plated brass for lasting performance, while it reduces attenuation and enhance transmission capacity.

RF Adapters cost solution,which is high quality and quick combinations by simply screwing two connectors together, with no soldering or crimping required.

RF Adapter Product Line includes in-series RF adapters design and between series adapter designs as well as T and Cross RF adapters.

Interface types are included in RF adapter ,such as SMA, TNC, N and BNC,which are available in male, female, plug, jack, receptacle gender, in 50 Ohm &75 Ohm impedance and in standard polarity or reverse polarity.

RF Adapters are available in quick disconnect (QD), push-on or standard interface , straight, 90 degrees versions,as well as bulkhead ,or 4 hole panel configurations.

RF Adapters in standard and high performance with brass body .The stainless steel body will be customized !