Solar Sensing Light

Select a place with the most sunlight during the day and screw the fixed wall pane onto the wall, hard walls require 6mm perforations. After the lamp is fixed, adjust the solar panel so that it faces the sun at noon to obtain the maximum power generations. Then adjust the lamp cap to the direction you want it to light up.

Note: Do not install it outdoors in light at night, as built-in sensors will prevent turning on solar lights.

Mode 1. When switched into this mode, the light would

Light up for 1s then turns off. When in dark environments and sensing people passing by, it turns on to high brightness. Auto turns off after 30s when detecting people leave range. The light would not turn on when I’m bright environment.

Mode 2. When switched to this mode, the light would

Light up for 1s then keep turned on of low brightness. When in dark environment and sensing people passing by. It switches to high brightness. Auto switches to low brightness after 30s when detecting people leave range. The light auto turns off in 2s if in bright environment.

Mode 3. When switched to this mode, the light would keep on in low brightness in low brightness environment. The light would not turn on in bright environment.

Note: when the device is turned on, 1: the red dot light would keep off when charging; 2: the red dot light would keep flashing in mide 1 and mide 2; 3: the red dot light would keep off when in mode 3.