Single Universal Wall Switch Socket with USB-A & USB-C Fast Charging Ports

Product Name:

Single Universal Wall Switch Socket with USB-A & USB-C Fast Charging Ports ( England – Brushed Off-White with Rose Gold Trim)

Description:

This wall outlet is a single-gang square electrical switch socket featuring a multi-configuration universal outlet, an integrated Type-C (USB-C) port, a standard USB-A port, and an individual ON/OFF rocker switch. Built with a brushed off-white metallic faceplate, slim rose gold border trim, and subtle " - ENGLAND" branding at the bottom corner, it delivers modern high-speed charging alongside broad global plug compatibility.

Features:

Universal Socket Outlet: Designed with multi-pin slot geometry to accept UK 3-pin (Type G), US 2-pin/3-pin (Type A/B), EU 2-pin (Type C/F), and Australian (Type I) plug types.

Dual USB Ports (USB-A + USB-C): Features both modern USB Type-C and standard USB Type-A ports, enabling direct device charging without separate plug adapters.

Dedicated Power Switch: Includes a top-right mechanical rocker switch to control main power supply directly to the socket receptacle.

Refined Aesthetics: Styled with a brushed matte/satin faceplate surface encased in a metallic rose gold accent frame.

Highlights:

Next-Gen Device Ready: Built-in USB-C port provides convenient direct charging for modern smartphones, tablets, and smart wearables.

Eliminates Adapter Clutter: Universal design allows international appliances and locals electronics to plug directly into the wall unit.

Safe & Convenient: Integrated rocker switch allows easy cutoff of connected power to reduce standby electricity consumption without unplugging cords.

Installation Instructions:

Safety First: Disconnect power at the main circuit breaker panel before handling any electrical wiring. Confirm the circuit is completely dead using a calibrated voltage tester.

Remove Old Socket: Unscrew the existing wall plate and carefully pull out the unit to expose the terminal connections inside the backbox.

Wire Terminals: Connect the household wires to the labeled rear terminals of the socket block:

Live (L): Connect the live supply wire (typically red or brown).

Neutral (N): Connect the neutral wire (typically black or blue).

Earth/Ground (E): Connect the protective earth conductor (green/yellow stripe).

Mounting: Tuck wires neatly back into the junction box, align the mounting holes on the socket sub-frame with the wall box, and secure using the provided screws.

Attach Trim/Plate: Press or fasten the decorative brushed faceplate and rose gold frame firmly into position.

Testing: Restore circuit power at the breaker panel and test functionality using a circuit tester or USB power device.

Note: Installation should be performed by a qualified electrician or licensed installer in compliance with locals wiring codes.

Maintenance:

Cleaning: Turn off the wall switch prior to cleaning. Wipe the surface using a dry or slightly dampened soft microfiber cloth. Do not use liquid sprays, abrasive pads, or chemical solvents that could leak into socket apertures or scratch the finish.

Regular Checks: Periodically check for signs of discoloration, warmth, loose wall fittings, or damaged USB connections.

Load Management: Avoid connecting appliances that exceed the socket's rated total current capacity (typically 13A or 16A max).