Samsung Galaxy A20S Touchscreen

Samsung Galaxy A20S Touchscreen Replacement

Before Installation Notes

Tip 1: Test before installation

When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.

Before attempting any repair, be sure to ground yourself is an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.

Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.

Tips 2: Simulates testing

Screen replacement is a very fragile product. We strongly suggest testing before installation. Please simulate testing, which means the mobile phone is apart, (motherboard + LCD or screen) connected audio cable and a new replacement, power on, and test finished. If the test is OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed on a mobile phone. We will not be responsible once the screen is installed.

Tip 3: Do not over-bend the cable

Please make sure the LCD cable does not over-bend. Over 90 degrees bent will cause a black display.

About the product

• Replacement LCD screen + touch screen digitiser assembly for Samsung Galaxy A20S
• Replace the old, broken, cracked, or damaged one
• Make your device look more refreshing than ever
• Completely fit and work
• Each item has been checked and is in good condition before shipping
• Professional installation is highly recommended. We will not be responsible once the screen is installed

Warning: 

1. Replacing the screen requires testing it thoroughly on the device before fixing it on the device. Because once it's glued on the device, it cannot be returned if you return it with a complaint that it's faulty afterwards. This is a mobile phone part, not a whole consumer electronics product. So it needs to be tested before fixing it on the device. If you can't heed this warning, please do not bother buying from us. Thanks!
2. LCD screens, touch screens, and cables require professional installation. It is not recommended for customers without phone repair or technical DIY experience to install them by themselves! If you are not sure you can replace it, please try to hand it over to a very good repair shop and pay a little installation fee to let professionals install it! Before installation, use the motherboard to test the purchased products. After there are no problems, install it! Remember not to rush to install it as soon as you receive the goods. You must try it first before installing it!  During the installation process, do not fold the cable in half, and do not tear off the film, labels, and seals at will. The above are all warranty bases!