RS485-LN/BL RS485 Modbus To LoRaWAN Converter For Smart Meters/Smart Building

The RS485-LN is a RS485 to LoRaWAN Converter . It converts the RS485 devices into LoRaWAN wirele network which simplify the IoT installation and reduce the installation/maintaining cost. RS485-LN allows the user to monitor / control RS485 devices and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets profeional wirele sensor network applications such as irrigation syst, smart metering, smart cities, smartphone detection, building automation, and so on. For data uplink: RS485-LN sends user-defined commands to RS485 devices and get the return from the RS485 devices. RS485-LN will proce these returns according to the user-define rule to get the final payload to upload to LoRaWAN server. For data downlink: RS485-LN runs in LoRaWAN Cla C. When there downlink commands from LoRaWAN server, RS485-LN will forward the commands from LoRaWAN server to RS485 devices.

Features:

LoRaWAN Cla A & Cla C protocol (default Cla C)

Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864

AT Commands to change parameters

Remote configure parameters via LoRa Downlink

Firmware upgradable via program port

Support multiply RS485 devices by flexible rules

Support modbus protocol devices

Uplink on periodically or polling

Downlink to send RS485 commands

Applications:

Smart Buildings & Home Automation

Logistics and Supply Chain Management

Smart Metering

Smart Agriculture

Smart Citie

Smart Factory

Order info: RS485-LN-XX:

XX : the default frequency band

868: Default frequency band EU868

915: Default frequency band US915/AU915/AS923

The RS485-BL is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions.User can connect RS485 or UART sensor to RS485-BL converter, and configure RS485-BL to periodically read sensor data and upload via LoRaWAN network to IoT server. RS485-BL can interface to RS485 sensor , 3.3v/5v UART sensor or interrupt sensor. RS485-BL provides a 3.3v output and a 5v output to power external . Both output voltage are controllable to minimize the total system power consumption. RS485-BL is IP67 waterproof and powered by 8500mAh Li-SOCI2 battery , It is designed for long term use for several years. RS485-BL runs standard LoRaWAN 1.0.3 in Cla A . It can reach long transfer range and easy to intergrate with LoRaWAN compatible gateway and IoT server. Each RS485-BL pre-loads with a set of unique keys for LoRaWAN registration, register these keys to local LoRaWAN server and it will auto connect after power on.

Order info: RS485-BL-XX:

XX : the default frequency band

868: Default frequency band EU868

915: Default frequency band US915/AU915/AS923

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.