PowMr PZEM AC 6in1 220V100A Single Phase Digital Ampermeter Power Energy Voltmeter Ammeter Volt Watt Kwh Factor Meter Split CT

PowMr PZEM AC 6in1 220V100A Single Phase Digital Ampermeter Power Energy Voltmeter Ammeter Volt Watt Kwh Factor Meter Split CT

A.Function

1. Electrical parameter measurement function

(voltage, current, active power, energy, frequency, power factor)

2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).

3. Power alarm threshold preset function (can set power alarm threshold).

4. The energycan be reset use thekey.

5. Store data when power off.

6. Large-screen LCD

7. Backlight function.

B.Appearance and Keyfunction

I.Display Interface

Display interface is large-screen LCD, it can displaysixparameters at the same time.

II.Display format

1.Power: test range: 0~22000W,Startingmeasure power:0.2W

＜10Wdisplay format:1.00~9.99W

＜100Wdisplay format:10.0~99.9W

＜1000Wdisplay format:100~999W

＜10000Wdisplay format:1.00~9.90kW

≥10000Wdisplay format: 10.0~22.0kW

2.Energy: test range: 0~999kWh

＜1kWhdisplay format:0~999Wh

＜10kWhdisplay format:1.00~9.99kWh

≥10kWhdisplay format: 10~999kWh

3.Voltage: test range: 80~260V

Display format: 80~260V

4.Current: test range: 0~100A,Starting measure current:0.001A

＜10Adisplay format:0.000~9.000A

≥10Adisplay format:10.00~99.99A

5.Frequency: test range: 45~65Hz

Display format:45~65Hz

6.Power factor: test range: 0~1PF

Display format:0.00~1.00PF

III. Key

1.Backlight control

Short pre the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.

2. Reset energy

Step1: Long pre the key for 5 seconds until the energyvalueflash, then release the key.

Step2: Short pre the key again, then the energy value is cleared and exit the reset flashing state.

Step3:Ifthere is no operation on the key within 5 seconds,it means the energy value is not cleared and will exit the reset state.

3. Set power alarm threshold

Step1: Long pre the key until the LCD screen display“SET CLr”, then release the key to enter the setting state

Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short pre to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.

Step3: After finish the setting, long pre the key over 5 seconds will store automatically and exit, the rangeof active power threshold is 0.0～2.5kW.

C. Precautions

1. This module is suitable for indoor, please do not use outdoor.

2. Applied load should not exceed the rated power.

3. Wiring order can’t be wrong.

D. Specification parameters

1. Working voltage: 80 ~ 260VAC

2. Test voltage: 80 ~ 260VAC

3. Rated power:100A/22000W

4. Operating frequency: 45-65Hz

5. Measurement accuracy: 1.0 grade

E. Wiring diagram

F.dimension diagram(mm)

G. Hole Size(mm)

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:/strong>
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.