This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeIndustrial & ScientificAdditive Manufacturing Products3D Printer Parts & Accessories3D Printer Interface & Driver ModulesODESC3.6 Motor Controller Dual Drive FOC BLDC High
/product/04/6545692/1.jpg?1026)
/product/04/6545692/2.jpg?1026)
/product/04/6545692/3.jpg?1026)
/product/04/6545692/4.jpg?1026)
/product/04/6545692/5.jpg?1026)
/product/04/6545692/6.jpg?1026)
/product/04/6545692/7.jpg?1026)
/product/04/6545692/8.jpg?1026)
Share this product
₦ 294,650
₦ 353,60017%
In stock
+ shipping from ₦ 52,374 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 52,374
Arriving at pickup station between 03 June & 07 June when you order within next 8hrs 17mins
Door Delivery
Delivery Fees ₦ 52,654
Ready for delivery between 03 June & 07 June when you order within next 8hrs 17mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
Elecplayer
94%Seller Score
3 Followers
Seller Performance
Order Fulfillment Rate: Excellent
Quality Score: Excellent
Customer Rating: Good
Product details
The optimized dual drive ODESC3.6 motor controller board kit is of high performance, wide application, safe use, different modes and rapid heat dissipation. It's an excellent module kit designed for people who have a certain level of knowledge in electric circuit and are insterested in DIY.
Features:
This dual-drive brushless motor controller is based on ODrive, it features 8-56V applicable voltage and optimized high performance.
Mainly used for smart robot, large robotic arm, precision 3D printer, printing machine, electric surfboard, electric skateboard and so on.
Safe to use, with programmable voltage protection to prevent excessive battery discharge.
Multiple modes satisfy different needs-- speed mode, torque mode, current mode, position mode, trajectory mode, etc..
integrated high current skylight, tin column, customized heat sink, continuous and stable current, rapid heat dissipation to prolong service life.
Note: Size and color may be slightly different because of manual measurement and different light conditions. Thanks for understanding.
Specifications:
Main Color: Black & Green
Main Material: ABS +
Hardware Version: ODESC3.6 Dual Drive
: 4 Layers (4 x 2oz)
Applicable Voltage: 8-56V
Current: 50A Continuous (120A Peak)
Support Encoder: Compatible with Incremental Encoder, Absolute Encoder, Hall Sensor, AMT102, AMT103, TLB5012, AS5047
Communication Interface: Compatible with USB -- Open Source Protocol (PC, Raspberry Pi, ROS), UART (Embedded Device), PWM (RC Remote Controller), STEP/DIRECTION (PLC), GPIO, CAN, ANALOG INPUT
Item Size: 155 * 50 * 30mm / 6.10 * 1.97 * 1.18in
Item Weight: 164g / 5.76oz
Package Size: 19.5 * 12.5 * 3cm / 7.68 * 4.92 * 1.18in
Package Weight: 264g / 9.29oz
Package List:
1 * Motor Driver Board
1 * Resistor
1 * XT60 Male Head
1 * USB Cable
2 * 20AWG Resistance Wire
6 * 12AWG Motor Wire
2 * 12AWG Cable
Features:
This dual-drive brushless motor controller is based on ODrive, it features 8-56V applicable voltage and optimized high performance.
Mainly used for smart robot, large robotic arm, precision 3D printer, printing machine, electric surfboard, electric skateboard and so on.
Safe to use, with programmable voltage protection to prevent excessive battery discharge.
Multiple modes satisfy different needs-- speed mode, torque mode, current mode, position mode, trajectory mode, etc..
integrated high current skylight, tin column, customized heat sink, continuous and stable current, rapid heat dissipation to prolong service life.
Note: Size and color may be slightly different because of manual measurement and different light conditions. Thanks for understanding.
Specifications:
Main Color: Black & Green
Main Material: ABS +
Hardware Version: ODESC3.6 Dual Drive
: 4 Layers (4 x 2oz)
Applicable Voltage: 8-56V
Current: 50A Continuous (120A Peak)
Support Encoder: Compatible with Incremental Encoder, Absolute Encoder, Hall Sensor, AMT102, AMT103, TLB5012, AS5047
Communication Interface: Compatible with USB -- Open Source Protocol (PC, Raspberry Pi, ROS), UART (Embedded Device), PWM (RC Remote Controller), STEP/DIRECTION (PLC), GPIO, CAN, ANALOG INPUT
Item Size: 155 * 50 * 30mm / 6.10 * 1.97 * 1.18in
Item Weight: 164g / 5.76oz
Package Size: 19.5 * 12.5 * 3cm / 7.68 * 4.92 * 1.18in
Package Weight: 264g / 9.29oz
Package List:
1 * Motor Driver Board
1 * Resistor
1 * XT60 Male Head
1 * USB Cable
2 * 20AWG Resistance Wire
6 * 12AWG Motor Wire
2 * 12AWG Cable
Specifications
Key Features
- This dual-drive brushless motor controller is based on ODrive, it features 8-56V applicable voltage and optimized high performance.
- Mainly used for smart robot, large robotic arm, precision 3D printer, printing machine, electric surfboard, electric skateboard and so on.
- Safe to use, with programmable voltage protection to prevent excessive battery discharge.
- Multiple modes satisfy different needs-- speed mode, torque mode, current mode, position mode, trajectory mode, etc..
- integrated high current skylight, tin column, customized heat sink, continuous and stable current, rapid heat dissipation to prolong service life.
- This dual-drive brushless motor controller is based on ODrive, it features 8-56V applicable voltage and optimized high performance.
What’s in the box
1 x Motor Driver Board,1 x Resistor,1 x XT60 Male Head,1 x USB Cable,2 x 20AWG Resistance Wire,6 x 12AWG Motor Wire,2 x 12AWG Cable
Specifications
- SKU: GE779IP3DUGH5NAFAMZ
- Model: Driver Module
- Size (L x W x H cm): 19.50×12.50×3.00
- Weight (kg): 0.27
- Color: Black & Green
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/04/6545692/1.jpg?1026)
ODESC3.6 Motor Controller Dual Drive FOC BLDC High
₦ 294,650
₦ 353,60017%
Questions about this product?
