MAXKGO NELF V1 ESK8 LED Strip WiFi Controller Compatible with VESC/FSESC/Focbox 18 Color Modes ,With 2M WS2813 Strip

MAXKGO NELF V1 ESK8 WiFi Controller for VESC ,With 2M
MAXKGO ESK8 sport light strip controller is a dedicated controller for electric skateboard LED light strips. ESK8 controller combines 3 states--standby,breking and moving at the total of 18 color modes, suitable for e-skateborad, longboard, electric scooter and ebike etc..
It could controller six types of LED light strips: APA102, WS2801, WS2811, WS2812,WS2813 and WS2815,and can assistance 2048 LED grains at the exact same time.
It's compatible with VESC / FSESC / Focbox to realize different color shifting (jumping), brightness adjustment, and speed adjustment. The skateboard controller can be switched sensitively without interruption. Therefore, ESK8 controller is popular among electric skateboard enthusiasts.

Product specifications:
Type: 5V, With 2M WS2813 Strip
Rated voltage: 4.5V-5.5V
Minimum current value: 0.5A
Operating temperature: -40-85°C
Best humidity: 85%RH
Connection method: WIFI radio
Language: English
RAM: Built-in 3 modes in the standby state; built-in 8 modes in the moving state; built-in 8 modes in the braking state
Support LED strip type: APA102, WS2801, WS2811, WS2812, WS2813, WS2815
Color mode: most color modes of three states support customization except for a few modes with mark .
Indicator Light:
Blinking slowly for 3 seconds: It means that ESK8 is starting;
Flashing once: it means that a mode switch has just been performed;
Fast flashing: ESK8 has been reset to the factory state;
Steady on: ESK8 is running.
ESK8 Sport LED Strip Controller Features:
1. New visual design, more novel and comfortable.
2. The changing color frequency of the light strip reflects different speed of skateboard, making it safer to skate at night.
3. WiFi connection, one could usemobile phone to changestate, color and speed of the light strip. There are three different states: moving state, braking state, and standby state.
Material:Composite material
colour:Red

Package Contents:
1 x NELF S1 strip controller board (PCB) (soldered wire)
1 x PCB power board 9-90V to 5V step-down module (welded wire)
1 x WS2813 LED Strip 2m
2 x JST-2P line (male)
2 x SM2.54-3P line
2 x SM2.54-4P line
1 x HY2.0-4P to 2.0-7P line
1 x HY2.0-4P to 2.0 8P line
1 x XT60 conversion head
1 x English Manual

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !