MAXKGO BMS Li-Ion Battery 4S 5S 6S 7S 8S 10S 12S 13S 14S 12V-24V 200A Pack Balance Protection Board for 18650 Battery,4-7S

MAXKGO BMS Li-Ion Battery Protection Board for 18650
Product Description: Charging current: less than equal 60A; Discharge current: 200A; Internal resistance: less than equal 15m ohm; Charging voltage:The number of Li-ion batteryin series connection X 4.2V; Wiring : Same Port
Overcharge protection: Detection voltage: 4.25±0.025V; Detection delay: 1000±500MS; Release voltage: 4.15±0.05V; Over-discharge voltage protection: Detection voltage: 2.75±0.1V; Detection delay: 1000±500MS; Release voltage: 3.0±0.1V
Balanced voltage: Detection voltage: 4.15±0.025V; Detection delay: 100±50MS; Balance current: 42±5MA; Over discharge current protection: Detection voltage: 50±15MV; Detection delay: 1000±500MS; Current protection: 600±60A
Short circuit protection: Trigger condition: external short circuit; Detection delay: 300us; Release condition: disconnect the load; Temperature control protection: Charge and discharge over-temperature protection: 55℃; Charge and discharge high temperature release temperature: 75℃; Release condition:During normal working temperature
Self-consumption: Working power consumption: less than 35UA; Over-discharge power consumption(Sleeping State): less than 10UA; Operating temperature range: -30°~+80°C; Product Features: Overcharge protection; Over discharge protection; Overcurrent protection; Balanced protection; Temperature control protection

ATTENTION:
1. The sequence of connecting wires for BMS:
a. From thin black balance wire to stare, the 2ndwire(thin red wire)connect with the 1stbattery's positive pole.Then connect each cell's positive pole in order until the last one B+.
b.Please do not insert the plug directly after the cable is connected.Measure the voltage between each two adjacent metal terminals on the back of the plug. If it is a ternary polymer battery, the voltage should be between 3.0 ~4.2V, and the voltage of the iron-lithium battery should bebetween 2.0 ~3.6V. The voltage should be between 1.5~2.75V.
c.After confirming that the wiring sequence and voltage of the cables are correct, insert them into the socket of the protection board.
Attentionplease: The cables of different manufacturers are not universal, please make sure to use the matching cables.
2. After the wiring is completed, measure whether the voltage of battery B+and B- ,andthe voltage of B-and C- are equal. If they are equal, the protection board is working normally and can be used normally. If it is not equal, please check the wiring again.
Type:4-7S
color:Green
Material:composite material

Package Contents:
1 x PCBA board
1 x HY2.0 single head 8P line

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !