High Quality Mechanical Edge Finder 10MM For Milling

Note for use of photoelectric edge finder

Please  Note :All it don't include batteries！！！

(1) Before using edge finder, ensure that the two right-angled edges of the workpiece are parallel to the X axis and Y axis respectively.

(2) When using photoelectric edge finder, do not open the ndle motor to avoid damage.

(3) Photoelectric edge finder is the use of photoelectric principle, the workpiece must be an electric conductor, otherwise it can not be used. At the same time, the loop is formed through the ndle, the bed, the workpiece, so the bottom of the workpiece can not have insulating objects.

(4) Keep the edge finder and the workpiece clean, without metal debris or burr attachment, so as not to make the indicator light when there is no contact with the workpiece, and get the wrong result.

(5) When moving from the work-piece side to the other side, the edge finder should be lid to avoid damaging the edge finder in the movement.

(6) When fast contact with the workpiece, pay attention to the minimum step size close to the workpiece, so as to improve the accuracy.

(7) Because there is radial runout in the steel ball part of the edge finder, we adopt the method of measuring the edge and rotating the edge finder 180° to measure the other edge to eliminate the error (ensure that the same point of the edge finder is used to contact the workpiece). When measuring one side, measure once, rotate half circle, measure again, add the two results divided by 2, likewise, eliminate the error caused by jumping. Note that when rotating, do not hold the edge finder by hand for rotation, but hold the card head for rotation.

Turn, but hold the head of the card to n.

(8) Ar the experiment, according to the standard method to find the center of the workpiece, the error is within 0.02mm, looking for the workpiece edge coordinates can achieve the same precision.

Notes:

1. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Please allow slight dimension difference due to different manual measurement.

2. Manual measurement, please allow 1~2mm error, thanks

3.Don't open the dispute ,pls ,any questions ,feel free to contact with our customer service ,we can slove your probl .

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.