Heated Knee Knee Massager Support Knee Pads Warm For Osteoarthritis Rheumatic Arthritis Joint Pain Relief Injury Recovery

Knee Infrared Heating Vibration Maager Joint Physiotherapy Maage Electric Maage Relief Pain Rehabilitation Equipment Care: This is an advanced treatment device that combines inflatable maage technology with lighting technology. It provides you with a four-dimensional maage, as well as direct irradiation of 615-650nm red light in your knee joints and joint cavity, improving the microcirculation and metabolism of related areas, and increasing the tiue richer blood supply. In addition, it increases the tensile strength of tiue repair, eliminates inflammation, reduces joint edema and stiffne, and relieves pain.

R-328

Product Characteristics 1. Built in 20 red light physiotherapy lamps. Air preure maage, hot compre, vibration. 2. Adopt 4-dimensional package design to take good care of your knee joint. 3. The product is equipped with lithium battery.and 2600 Ma is convenient for use. Product Specification Product Name:Knee Maager Rated Voltage: DC 5V Rated Current: 1A Rated Power: 5W Product Net Weight: 0.8kg Product Size: 20.5x15.5x17.5cm Time on: 15/ 20/25/ 30 minutes Heating Temperature: low level: 45 ± 3 ℃, middle level: 50 ± 3℃, high level: 55 ± 3 ℃ Guide for use 1. Tie the product to the knee with a srap. For best results, please Stay as dlose to your knees as posible 2. Long pre on/ off key, the product starts to work. The default value is Low temperature, low kneading preure, vibration, red light, prhysical therapy. 3. Ar the product is opened, pre the "heating' key briefty, and in the mode with heating function Adjustable heating temperature (low medium high, HL, H2, H3, HP, display For the temperature gear update display on the screen, the "hot pack" key can tum off the heating function At the same time, the product has a "tick" sound prompt Short pre "force" key, adjustableAir bag kneading force (weak medium strong, L1, L2, L3), display Update display of corresponding strength gear; short pre "red light" key to tum on red light management At the same time, the product has a "tick" sound prompt 4. Time key, pre key 15/20/25/ 30 minutes, the product will automatically shut down. In making With the "on/ off" key of Chang'an in the proce, the product can be shut down economically 5. Mode key. PI vibration, air preure, heating P2 vibration P3 air preure 6. It is better to use it continuously for no more than 30 minutes each time. Product Charging 1. Please use DcsV adapter, insert the charging cable with the machine, USB end into the adapter, the other end of the Android interface into the machine power jack, andProduct charging ① The battery icon of the display screen runs in three grid progre bar, which represents charging and current power The quantity is le than 33%the display shows the charging status: ②33% charge completed, the first progre bar is always on, and the other two progre bars are running Move) ⑤) 66% charging is completed, the first and second grid progre bars are always on, and the third grid flashes; ④ When the charging is completed, the three grid progre bar is always on 2. When using the product, if the outer frame of the battery icon flashes, the product should be stopped and charged immediately. 3. When charging the product, please use the adapter with CSV, 1A or above, or use the USB port of the computer to charge the product Precautions before use 1. Patients with acute swelling or bleeding of the knee shoulo consult a doctor before use. 3. Patients with rheumatoid arthritis should consult a doctor before use. 4. Patients suspected of edema, bacterial infection and other special inflammation caused by acute trauma should consult a doctor before use. 5. It is forbidden to use it for pregnant women, infants and children, atients with skin perception disorders or skin abnormalities. 6. Please stop using the product immediately when the pain increases ar use 8. When using this product, if you feel that the kneading force is too strong, you can pre and hold the "maage" on for a long time to release air. 9. If the product is not used for a long time, please put the product and the power adapter into the packing box and store them in a dry and ventilated place. Do not fold or pre them. Keep them away from moisture, moisture and fire. 11. If it is neceary to clean the product, please do not immerse the product in water or machine wash it. Ar the power is cut off, please use a fine soft brush or clean cloth with water or neutral detergent to wring it out and then clean it. Only ar the product is fully dried can it be used by power. Be careful: When the power is too low, it needs to be charged in time to avoic exceive discharge For a long time, the battery should be charged every other month to avoid aging Packing List 1 X Knee Maager 1 X Manual 1 X USB Cable

R-234

Feature:

1. Increase knee local blood circulation.

2. Enhance joint flexibility and comfort.

3. Physical therapy for various types of knee arthritis.

4. Safety - 12V safety voltage, you need not worry about the potential safety hazard.

5. Fixed-point therapy - Sports knee pads, firmly fixed on the knee, keep the heat over your knee.

6. Maage - Built-in motor vibration maager, stretching tension physique and muscles.

7. Asiatic wormwood physiotherapy - warming and activating meridian, promoting "qi" to activate blood, clearing heat for detumescence and antibacterial.

8. Hot compre - has the effect of vasodilation, promote local metabolism, relieve muscle spasms, promote inflammation and blood stasis absorption;

9. Timing - 10 minutes, 20 minutes, 30 minutes time settings.

10. Temperature regulation - There are High/Middle/Low temperature third modes can be changed.

11. Smart Design - can only use on one knee, you can also use only vibration or heat.

How to use:

1. Wear the product on the knee

2. Power on.

3. Pre the "Time" on to turn on the device, then pre "Time" to adjust the time for working (10/20/30 Minutes)

4. Knee pads will automatically select the high heat mode, and automatic timing 10 minutes, according to the need to switch.

5. Pre "Vibration" on to turn on/off the vibration maage function.

6. Pre "Heat" on to choose High/Middle/Low temperature.

7. Long pre the "Time" on to turn off the device.

Specifications

Input voltage: AC 100~240V 50/60HZ

Adapter voltage: 5V

Working current: ≤2.0A

Rated power: 15W

Automatic timing 15 minutes

laser wavelength: 615-650mm max:5mW

Standby current ar shutdown: