This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeHome & KitchenHome DecorLampshadesGLEDOPTO WW/CW Smart Control Lighting 12V-24V Dimming
₦ 83,617
₦ 163,05949%
1 units left
+ shipping from ₦ 14,883 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 14,883
Arriving at pickup station between 24 May & 30 May when you order within next 6hrs 42mins
Door Delivery
Delivery Fees ₦ 15,253
Ready for delivery between 24 May & 30 May when you order within next 6hrs 42mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
tiny spots
26%Seller Score
29 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Very Poor
Customer Rating: Good
Product details
Detailed Information About The Product:
1. Prepare the cable as in picture P1 and strip the insulation to 9-10mm. The wire The cross section must be between 0.33 and 2.08mm and higher 2; (AWG22-14).
2. Now push the terminal with a screwdriver and put the cable.
3. Remove the screwdriver and the cable is connected to the terminal.
In the image P3-P7 you can see examples for the connection of different LED drivers:
-P3 for RGBW / RGBWW products
-P4 for RGB products, please use RGBW dimmer and Do not connect W cable
-P5 for single color LED products, please use RGBW dimmer and do not connect cable
RGB
-P6 for RGB + CCT (warm white + cold white) products
-P7 for CCT products (warm white + cold white)
Connection with Gateway:
1. Connect the LED product to the controller to see the "cable connection" section.
2. Start the device search on the ZigBee light gateway, it might take some time.
If the gateway cannot find the device, connect the power on / off or do a reset.
3. The gateway has found your device and you can assign it to the different rooms / zones / groups.
4. Now you can use the device.
Restore:
1. Turn on your device.
2. Now turn off and on in 2 seconds.
3. Repeat on / off four times.
4. Restart is performed when the device is turned on for the fifth time and the light stays on
After blinking 4 times.
size:23.5*48*89mm
Material:plastic
colour:white
Package Contents:
2 * 2.4G wireless WW/CW LED controller
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
18328. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
1. Prepare the cable as in picture P1 and strip the insulation to 9-10mm. The wire The cross section must be between 0.33 and 2.08mm and higher 2; (AWG22-14).
2. Now push the terminal with a screwdriver and put the cable.
3. Remove the screwdriver and the cable is connected to the terminal.
In the image P3-P7 you can see examples for the connection of different LED drivers:
-P3 for RGBW / RGBWW products
-P4 for RGB products, please use RGBW dimmer and Do not connect W cable
-P5 for single color LED products, please use RGBW dimmer and do not connect cable
RGB
-P6 for RGB + CCT (warm white + cold white) products
-P7 for CCT products (warm white + cold white)
Connection with Gateway:
1. Connect the LED product to the controller to see the "cable connection" section.
2. Start the device search on the ZigBee light gateway, it might take some time.
If the gateway cannot find the device, connect the power on / off or do a reset.
3. The gateway has found your device and you can assign it to the different rooms / zones / groups.
4. Now you can use the device.
Restore:
1. Turn on your device.
2. Now turn off and on in 2 seconds.
3. Repeat on / off four times.
4. Restart is performed when the device is turned on for the fifth time and the light stays on
After blinking 4 times.
size:23.5*48*89mm
Material:plastic
colour:white
Package Contents:
2 * 2.4G wireless WW/CW LED controller
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
18328. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Specifications
Key Features
- Durable and good quality
- 1. Prepare the cable as in picture P1 and strip the insulation to 9-10mm. The wire The cross section must be between 0.33 and 2.08mm and higher 2; (AWG22-14).
- 2. Now push the terminal with a screwdriver and put the cable.
- 3. Remove the screwdriver and the cable is connected to the terminal.
- The details are as described above
What’s in the box
2 * 2.4G wireless WW/CW LED controller
Specifications
- SKU: GE779FD47IQRLNAFAMZ
- Model: light controller
- Production Country: China
- Size (L x W x H cm): 9x5x6
- Weight (kg): 0.127
- Color: white
- Main Material: plastic
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
GLEDOPTO WW/CW Smart Control Lighting 12V-24V Dimming
₦ 83,617
₦ 163,05949%
Questions about this product?