DC 3.7V-7.4V DC 3V-6V 3.7V-6V To 400kv 1000KV 1000000V Boost Step Up High-voltage Generator Ignition Coil Pulse Power Module

Description:

Input voltage: DC 3 V to 6 V

Input current: 2 A - 5 A

High preure type: the type of pulse current

Output voltage: 400000 v(Please pay attention to safety)

High preure discharge distance between: 10 mm - 20 mm

The output high voltage wire length: 100 mm

Input power cord length: 100 mm (the red line is positive)

Wiring:

Red and green power connection red line:''+'' green line ''-''

output : the other side ,same color cable

Please notice:

The high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-preure a( not a voltage as high as poible , you must provide enough current ) . Experimental test of the adistance from short to long , Do not exceed the maximum adistance electricity, energy can not be released due to high preure , can easily damage the module. )

Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module

Specifications:

Module type: MC-901

Input voltage: 3.7V-7.4V

Input current: 0.5A-1A

Input wire length: 9 cm

High voltage type: pulse DC type

Output voltage: 800KV-1000KV (please pay attention to safety when using)

Output current: 0.5A-1A

Output length: approximately16 cm

High voltage bipolar discharge distance: 1.5 cm -2 cm

Size:88x26mm(LxD)

Module use note:

1. high voltage module should avoid the use of high voltage no-load, power must be adjusted before the high voltage line end of the right distance, high voltage wire drawing distance and the use of battery voltage and capacity is proportional to.

2. the test adistance from short to long experiment, when the power is prohibited beyond the longest adistance, due to the high preure energy can not be released, very easy to damage the module.

3. the power of the module, the internal heat is not heat, so not a long time to work.

You can choose:

1* 400KV 56mm

1* 400KV 65mm

1* 1000KV

1* 50KV

50KV square:

Product selling point:

1: Wide range of applications

2: Small size

3: Simple to use

4: cost-effective

5: Used for high-voltage testing, teaching, product development, etc.

The input of the module is red, positive, green, and negative, and the color of the two output lines is the same.

Physical volume: length 40mmX width 40mmX height 18mm

Input voltage: DC3.6-4.8

Output voltage: DC50KV (awithin 2CM)

Adistance: 5-15MM

Features: small size, no residual power

This baby is suitable for high-voltage testing, teaching, product development, etc.

Precautions for use:

The input of the module is red, positive, green, and negative, and the color of the two output lines is the same.

The high-voltage module should be avoided when it is powered on at high voltage and no load. Before power-on, the appropriate distance from the high-voltage wire end must be adjusted. The arcing distance of the high-voltage wire is proportional to the voltage and capacity of the battery used. The ais drawn from short to long. It is strictly forbidden to exceed the longest arc. distance.

Package Included:

1* High Voltage Generator

20000V square:

Specifications:

Input voltage: DC3.7-7V

Output voltage: 20000V

Working current: 10ma

Discharge distance: within 14mm

Module input: red positive negative,

When using, adjust the output spacing first and then turn on the power.

Intermittent work is recommended for short periods of time.

Dimensions: 79.5mmx22mmx20mm

Package Included:

1* High Voltage Generator

40-50KV:

Product selling point:

1: Wide range of applications

2: Small size

3: Simple to use

4: Working current: 1800mA

5: Ignition distance: 2-10mm

Parameter:

Product name: DC pulse high voltage package

Product size: length 50mm width 20mm thickne 18mm

Input voltage: DC 3.6V, 4.8V

Output voltage: 40-50KV

Working current: 1800mA

Ignition distance: 2-10mm

Inlet Diameter & Length 1.2±0.03 & 130mm

Output live wire diameter & wire length 2.2±0.03 & 280mm

Output ground wire diameter & wire length 2.2±0.03 & 280mm

Weight 35g

Product use: security equipment acceories, kitchen stove ignition, electrostatic adsorption experiments

Package Included:

1* High Voltage Generator

800KV:

Product selling point:

1: Wide range of applications

2: Small size

3: High efficiency

4: Output high voltage pulse

5: cost-effective

This module is a high-voltage module/high-voltage generator made by a high-voltage package/transformer through a circuit composed of components. It can be used as a high-voltage source for students' popular science experiments/electronic instruments/negative ion generator/science mini-production. The module is made using the principle of Tesla coil. It can output high voltage pulse, small size, high efficiency and violent discharge intensity.

Product Name: High Voltage Generator

Volume: length 88mm diameter 26mm cut surface diameter 24mm

Voltage: Input DC6-12V,

Output DC800KV

Current: input 4A, output 0.5A

Line length: input about 10 cm,

output about 10 cm

Structure: shell integrated

Two-pole discharge distance: about 0.5-1.5 cm (more easily damaged)

Uses: commonly used in high-voltage production, electronic DIY, product development, high-voltage electronic anti-theft, etc.

How to use: The two poles of the high-voltage output end (single-color thick line) are fixed within the specified discharge distance, and the red line of the low-voltage input end (two-color thin line) is connected to the battery.

Input requirements: This product does not need auxiliary circuits, and can be used directly when connected to a battery. The input terminal is connected to a single 3.7V lithium battery (such as 18650 battery) or a nickel-cadmium/nickel-metal hydride battery pack, 4V or 6V battery, etc. (6V battery can reach the maximum best effect)

Notes on using the module:

1. The high-voltage module should be avoided to be powered on when the high-voltage is no-load. Before power-on, the appropriate distance from the high-voltage line must be adjusted. The arcing distance of the high-voltage line is proportional to the voltage and capacity of the battery used.

2. When testing the adistance, the experiment should be from short to long. It is strictly forbidden to exceed the longest arcing distance when power is on. Because the high-voltage energy cannot be released, it is very easy to damage the module.

3. The power of the module is large, and it is not suitable for heat diipation inside, so it cannot work for a long time.

4. The way to judge whether the battery capacity can drive the maximum output power is to measure the battery voltage when the ais drawn. If it is around 6V, it can output the maximum power.

5. Two small-capacity lithium batteries are connected in series to 7.2V, and the measured voltage has dropped to about 4V in the arcing state. The smaller the capacity, the lower the voltage. Therefore, it is recommended to use a lithium battery above 2000MA, and it is best to use a battery above 4000MA if poible.

Package Included:

1* High voltage generator high voltage module

20KV square:

Features:

Dual high-voltage cables can be lit by cigarette paper, and one high-voltage cable can be supported in Metallkoerper current and without sound.

This module can be used as high school science experiment equipment, electronic equipment, negative ion generator, and high voltage source for doing science hours.

About performance:

Single 18650 or idle mobile phone battery (remove the protective plate, the position is more than 2000mAh, and the capacity is planned).

Notice:

1. The high-voltage module should avoid using no-load high-voltage current. The power must be set at the appropriate distance from the high voltage output line to the Batteriekapazitaet proportional to the distance and to utilize the high voltage a(the voltage is not supplied as high as poible to have power).

2. Experimental test from short to long adistance. Without the maximum adistance used by the stride power, the energy cannot be released and the module can be easily damaged due to the high voltage.

3. Due to the power, the internal heat is not easy, each working time should be set within 5 seconds.

Specification:

Material: Metal, Plastic

Color: black

Dimensions: 19×20×18mm (LxWxH)

Weight: 19 grams

Input voltage: DC3.6V-6V

Input current: 1.5A

Output voltage: (please pay attention to safety when using) DC20KV

Output current: 0.05A

Input line length: about 1.1mm (red is positive)

Ausgangsleitungslaenge: about 110 mm

High voltage bipolar discharge distance: 5mm

High Art: Impulse Current

Structure: high integration, low voltage

Package Included:

1* 20kV Boost Boost Power Module

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.