Color Graphic Display M328 Transistor Tester Resistance ESR

Detailed Information About The Product:

One-Click Measurement Operation, Automatic Power Off After Delay. The Shutdown Current Is Only 20na, Supporting Battery Operation. Supports The Measurement Of Two Resistors, And The Potentiometer Can Also Be Measured. If The Potentiometer Is Adjusted To One End Of It, The Tester Cannot Distinguish Between The Pins In The Middle And The Ends. The Resolution Of Resistance Measurement Is 0.1 Ω, And The Highest Measured Value Reaches 50m Ω.
Automatically Detect Pnp And Npn Bipolar Transistors, N And P Channel Mosfets, Jfet Field Effect Transistors, Diodes, Dual Diodes, Thyristors, Resistors, Capacitors, And Inductors. Automatically Detect Pin Definitions.Measure The Current Amplification Factor (B) Of The Bipolar Transistor And The Turn-On Voltage (Uf) Of The Emitter Junction.Darlington Transistors Can Be Identified By Their High Threshold Voltage And High Current Amplification Factor.
Capacitance Measurement Range Is From 25pf To 100mf (100, 000Uf). The Resolution Can Reach 1Pf,And The Inductance Measurement Range Is 0.01mh-20h.Otherwise,Will Displayed As Resistance.If The Dc Resistance Value Of Inductor Is Higher Than 2100Ωs,It Will Also Be Displayed As Resistance.When Testing The Capacitor, Vloss Displayed On The Screen Means Loss And Attenuation. The Larger Value,The Closer The Capacitor Is To Scrapping!Esr Is Impedance.The Smaller Value,The Better Capacitor Performance!
The Protection Diodes Inside Bipolar Transistors And Mosfets Can Be Detected And Displayed On The Screen. It Can Detect The Equivalent Series Resistance (ESR) Of Capacitors Above 2uf With A Resolution Of 0.01 Ω. This Feature Is Very Important For Testing Capacitor Performance. It Is Possible To Display The Correct Direction Sign For Both Diodes, As Well As The Forward Voltage Drop.
Measure The Threshold Voltage And Gate Capacitance Of The Mosfet. The Led Is Detected As A Diode, AndThe Forward Voltage Drop Is Higher Than The Normal Value. Dual Led Detection Is Dual Diode. The Led Will Flash During Detection. The Time Of Each Test Is About Two Seconds, Only Large Capacitance And Inductance Measurements Will Take Longer

Description:
Power Supply: DC9V (You Need To Bring Your Own 9V Laminated Battery 6F22)
Simple Operation Instructions: Connect Pins 1, 2, And 3 At Will, Automatically Identify The Type, Automatically Detect The Pin Sequence, Graphic Display, And Automatically Measure Parameters.
Test Scope Description:
1. Transistor Range: Transistors Composed Of Less Than 2 (Including 2) Pn Junctions, And Do Not Have Other Resistor-Capacitor Components Inside.
2. Resistance Measurement 0.5Ω-50mΩ
3. Inductance Measurement 0.01mH-20h
4. Capacitance Measurement 25pf - 100000uf
Note:
Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use
Material: ABS
colour: As Shown

Package Contents:
1 x Transistor Tester
1 x Socket

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !