Car universal key to start with the function of guard against theft warded locar anti~theft alarm

Function and feature descrtion of the 4th generation hine:1. Feature descrtion:1. The product its has a concealed lofunction, which automatically locks the engine ar stopping for 15 seconds.2. The product its has a one-key start and one-key shutdown function, which is convenient and quito .3. The product is equped with the indicator light on the start on to step on the brake at night to stay on for 2 seconds to facilitate the owner to find the on location function, which is very practical and convenient.2. s:Working voltage: DC voltage DC=12V, 24V power supply is not currently supported.Standby current: 8mA (Note: continuous standby can be up to 2 months)on display: blue light (Note: the blue light goes out in the anti-theft state, it stays on when the vehicle is started, and fes when the speaker is turned on)Enter anti-theft: every time the flame is turned off for 15 seconds, the system will automatically lothe engine, the whole car will be powered off, and the on light wilo outExit the anti-theft: get on the car and the ID card to approach the induction , and the host will beep twice to indicate exitActivating the indicator light prompt function at night: In the evening when it is inconvenient to find the position of the start on when getting on the car, the indicator light on the start on will be on for 2 seconds ar the brake is sted on, so that the owner can find the position of the start on, which is very practical.3. Conditions of Condition 1: It can be d in vehicles without e control and anti-theft, such as and small A0 cars. Ar installation, the vehicle will have one-on start and one-on flameout functions, and concealed loanti-theft functions.(Note: 1. When the one-key start key is installed and screwed to the ACC file to unlothe car steering wheel lock, the ignition plug behind the car loshould be removed at this time to prevent the car's audio when the key is in the ACC file Power consumption.Condition 2: It can be d in vehicles that have installed Rutiejun anti-theft device, anti-theft device and ordinary anti-theft device. Ar the installation, it will be protected by a concealed lofunction, which greatly increases the . At the same time, it also has one-key start and one-key flameout Function, concealed loanti-theft function.Condition 3: It can be d in conjunction with the PKE ligent keyle entry anti-theft device that has been installed to e the vehicle more ligent and humanized. It also has one-on start and one-on flameout functions, and concealed loanti-theft functions.

Four, functional operation instructions(1) Enter anti-theft: every time the vehicle is turned off for 15 seconds, the host beeps once, indicating that the system has entered the anti-theft state. At this time, the start on indicator is off, the whole vehicle is powered off, and the start operation is invalid.(2) Exit anti-theft: When the ID card is close to the area of the induction on the car, the host will beep twice at this time, indicating that the system has been withdrawn and the vehicle can be started at any time.(3) Short pre one on to start: step on the brake, short pre the start on once and then let go, that is, the vehicle will automatically start ar 0.7 seconds.(4) Short pre one on to turn off the engine: step on the brakes, short pre the start on once and then let go, the vehicle will turn off immediately.(5) Short pre one key to turn on the sound: do not step on the foot brake, short pre the one key start on to turn on the sound, the function is as if the key is turned to the first gear.(6) Short pre one key to turn ON the dasard: do not step on the foot brake, short pre the one-key start on to turn on the ON dasard ar the speaker has been turned on. At this time, the dasard is powered on, and the function is as if the key is in the first position. 2 gears.(7) pre one on to start the vehicle: When it is winter or when the vehicle is in a bad starting state, you can pre and hold to start the car at this time. The method is to step on the brake and pre and hold the start on without letting go. Wait for the vehicle to start succefully. Just let go.(8) Evening on light indication function: At night when the car is inconvenient to find the start on position when getting on the car, at this time, ar you can step on the brake, the indicator light on the start on will be on for 2 seconds to facilitate the car owner to find the start on location, which is very practical .Question: How to release the direction loar installing a key to start?Answer: This is the most frequently asked question by car owners. If you want to install one-key start, you mustYou need to break the car key in the key slot to unlothe direction lock. This isThe prerequisite for installing one-key start or removing the lodirectly.

(One- start the installation manual)

Seven, installation matters needing attention:1. When the vehicle has a steering wheel lock, when inserting the key into the keyhole and unlocking the steering wheel loin ACC gear, unplug the ignition plug of the car at the same time to prevent the car's audio from power consumption.2. When the car of the vehicle has an anti-theft , take out the anti-theft of the car and attach it to the area that can be scanned by the car, otherwise it may ca the startup to fail.3. Since the base of the start on is made of metal material, if it interferes with the anti-theft of the car when it is pd, another area should be selected for pment or heightening.4. The output of this product is a 5-wire system, that is, the red wire is connected to the car's live wire 12V, the orange wire is connected to the car's ACC wire (usually in the 1st gear), the wire is connected to the car's ON1 power supply wire (usually in the 2nd gear), yellow The wire is connected to the starting ignition wire of the car (this wire is energized at the moment of starting, and there is no electricity ar the start is completed), and the brown wire is connected to the ON2 power supply wire of the car (this wire has electricity when the key is turned on, but when the key is turned on) There is no electricity at the moment, when the startup is completed, there will be electricity again, pay attention to judgment when installing)5. When encountering some models with only 4 output wires, just the orange wire (ACC power supply), wire (ON power supply), yellow wire (ignition start wire, red wire (connect to the live wire at the head of the car). ), the brown wire is not d or d in parallel with the ON1 wire.6. When encountering some models with 6 output wirings, besides wiring according to the method of the 4th sub-item above, you must also find out the function of the 6th wire with the key. ACC gear, ON gear, and start gear. Under these 3 different states, the power supply of the 6th wire is detected. So if the 6th wire needs power when starting, it should be connected in parallel with the yellow start wire or It is isolated with a relay. If there is power supply in the ON position, connect the wire in parallel or a relay to isolate the power supply. Remember, otherwise it will be diffit to start.7. Compared with the start part of the all-in-one hine (with one-key start and keyle entry function), remember that the ground wire, that is, the ground wire, must be firmly connected and the ground wire must not be extended, otherwise it is easy to start diffit or a problem. The fact that the indicator light goes out ar sting on the foot brake is all due to loose ground or poor grounding.8. For some models, the foot brake is powered by the ON position. At this time, the foot brake cable should be cut off and connected to 12V power supply directly, so that it will not be activated by preing the switch twice.