Car Door Edge Guard

product descriptionColor: silverProduct specifications:Material: electroplated glossy PVCColor: electroplated glossy silverLength: 5 meters (16FT)Width: 10mm (0.39inch)Rim thickness: 7 mm (0.28 inch)Take a range of 1.0mm to 2.5mm (0.04" to 0.099")Installation Location:1. The metal edge of the body between the door and the body.2. At the door and more outside.3. The window above the car.4.Window panel minibus.5.Border heavy equipment.6. Cover the edges of sharp metal.7.Vinyl window decoration boat.how to install:1. Clean the door edges to remove oil, wax and dust. Make sure the door is dry before proceeding.2. Remove the tape from the lining tip (make sure the tape is installed inside the door).3. From the top, insert the lining into the edge of the door until the lining is fully seated.4. Press the lining along the edge of the door with your thumb until it is fully seated.5. Repeat step 4 until all edges are protected.6. Use scissors to cut off the unused lining on the other door edges.7. Let the liner dry on its own and do not get wet for at least 12 hours.