This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeIndustrial & ScientificTest, Measure & InspectNetwork & Cable Testers4.3 Inch IPS LCD Display Vector Network Analyzer S-A-A-2
₦ 191,700
₦ 398,35052%
In stock
+ shipping from ₦ 34,358 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 34,358
Arriving at pickup station between 04 June & 10 June when you order within next 23hrs 57mins
Door Delivery
Delivery Fees ₦ 34,638
Ready for delivery between 04 June & 10 June when you order within next 23hrs 57mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
FansWedy
46%Seller Score
1417 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Average
Customer Rating: Good
Product details
This portable vector network analyzer is a new product. It uses a 4.3-inch IPS LCD display and an aluminum alloy case. It is equipped with a 5000mAh large-capacity lithium battery as standard. Support touching screen and side button operation, support Chinese and English interface. The design of this product is based on OwOcomm's S-A-A V2, and deep optimization of the software is made on the basis of the previous product. The measurement ranges is extended to 3GHz, and the dynamic ranges is larger. The measurement is more accurate and the operation is more convenient.
Features:
4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes.
All aluminum alloy case, effectively shielding electromagnetic interference to ensure measurement accuracy.
The radios frequency interface is SMA, which is convenient for connecting various tested parts.
Full touching screen design, with 3 side buttons at the same time, flexible and convenient operation.
Support Chinese and English interface.
Optimized UI design, convenient for users to perform measurement operations.
Support screen brightness adjustment.
The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable.
Standard fine quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy.
Designed with USB output interface, which can support 5V/1A output.
Using 2A high current recharging IC, the recharging time is shorter.
Supporting host computers software, the host computers supports Chinese and English interfaces.
The screen imaging of the device can be obtained by taking a screenshot of the host computers.
Function: can measure S parameters, voltage standing waves ratio, Smith chart, phase, group delay, etc.
Specifications:
Material: aluminum alloy(case)
Main color: black
Battery: 1 * lithium battery, 5000mAh
Frequency: 50kHz-3GHz
Radio frequency output : -9dBm (error within 1GHz: ±1dB)
Frequency accuracy:
Features:
4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes.
All aluminum alloy case, effectively shielding electromagnetic interference to ensure measurement accuracy.
The radios frequency interface is SMA, which is convenient for connecting various tested parts.
Full touching screen design, with 3 side buttons at the same time, flexible and convenient operation.
Support Chinese and English interface.
Optimized UI design, convenient for users to perform measurement operations.
Support screen brightness adjustment.
The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable.
Standard fine quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy.
Designed with USB output interface, which can support 5V/1A output.
Using 2A high current recharging IC, the recharging time is shorter.
Supporting host computers software, the host computers supports Chinese and English interfaces.
The screen imaging of the device can be obtained by taking a screenshot of the host computers.
Function: can measure S parameters, voltage standing waves ratio, Smith chart, phase, group delay, etc.
Specifications:
Material: aluminum alloy(case)
Main color: black
Battery: 1 * lithium battery, 5000mAh
Frequency: 50kHz-3GHz
Radio frequency output : -9dBm (error within 1GHz: ±1dB)
Frequency accuracy:
Specifications
Key Features
- 4.3-inch IPS LCD display, resolution 800x480, ultra-wide viewing angle, long-term use does not hurt your eyes.
- All aluminum alloy case, effectively shielding electromagnetic interference to ensure measurement accuracy.
- The radios frequency interface is SMA, which is convenient for connecting various tested parts.
- Full touching screen design, with 3 side buttons at the same time, flexible and convenient operation.
- Support Chinese and English interface.
- Optimized UI design, convenient for users to perform measurement operations.
What’s in the box
1 x Host,1 x SMA Open Calibration Kit,1 x SMA Short-circuit Calibration Kit,1 x SMA 50Ω Load Calibration Kit,1 x SMA-KK Double Heads Female Hole Adapter,1 x SMA-JJ Double Heads Male Pin Adapter,1 x SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Adapter,2 x 200mm SMA-JJ RG405 Cable,1 x USB Type-C Data Cable
Specifications
- SKU: GE779IP3YX9HBNAFAMZ
- Model: N/A
- Production Country: China
- Size (L x W x H cm): 25.00×15.00×2.00
- Weight (kg): 0.52
- Color: Black
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
4.3 Inch IPS LCD Display Vector Network Analyzer S-A-A-2
₦ 191,700
₦ 398,35052%
Questions about this product?