product_image_name-Generic-2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino-1product_image_name-Generic-2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino-2product_image_name-Generic-2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino-3product_image_name-Generic-2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino-4product_image_name-Generic-2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino-5product_image_name-Generic-2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino-6

Share this product

Shipped from abroad

2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino

₦ 13,100
₦ 26,10050%

In stock

+ shipping from ₦ 2,543 to LEKKI-AJAH (SANGOTEDO)
Variation available

Promotions

Delivery & Returns

Shipped from abroad 

Choose your location

Pickup Station

Delivery Fees ₦ 2,543
Arriving at pickup station between 30 May & 05 June when you order within next 2hrs 47mins

Door Delivery

Delivery Fees ₦ 2,913
Ready for delivery between 30 May & 05 June when you order within next 2hrs 47mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

1

Seller Information

Hickey Mall

66%Seller Score

14 Followers

Follow

Seller Performance

Order Fulfillment Rate: Very Poor

Quality Score: Excellent

Customer Rating: Good

Product details

Package Included :
1*Base board
1* 35mm Wheels
1* Rubber Wheel bands
1* AA holder
2*Gearded Motors
1*Screw set
1*LM393 Chipset
1*8pin DIP Socket
10*Resistor
2*Electrolytic capacitor
2*Light dependant resistors
2*Transitors
2*White LED
2*Red LED
1* switch
4*70mm Leads

Features:
1.Model:D2-1
2.Name:Tracking Robot Car
3.Photoresistor (LDR) based line following
4.Individual wheel control
5.Chipset: LM393
6.Material: Electrical components
7.: See picture
8.Board Size:10.4*7.2cm

The assembly steps:
Step 1: Welding circuit
Electric welding part is simpler, welding sequence according to the principle of component level from low to high, the first welding eight resistance, is important to use multi meter to confirm resistance is correct

Step 2: Mechanical assembly
The red line is connected to the 3V positive supply, the yellow line grounding, excess wire can be used for motor wire.

Step 3: The installation of a photoelectric circuit
Photosensitive resistance and light-emitting diodes (note polarity) is -mounted on the , and the ground distance is about 5 mm, both photosensitive resistance and light-emitting diodes are 5 mm distance. Finally, you can .

Step 4: Vehicle debugging
The right direction is along the universal wheel direction, if you press and hold the left photo resistor, the wheels on the right side of the car should be rotated. Press and hold the right photo resistor, the wheels on the left side of the car should be rotated, if the car driving back, can also
exchange the wiring of two motors, if the one side normal and the side back up, as long as you can swap wiring of back side.










a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
image
image
image
image
image
image
image
image

Specifications

Key Features

  • Material: Electrical components
  • Board Size:10.4*7.2cm
  • Chipset: LM393
  • Individual wheel control
  • Photoresistor (LDR) based line following
  • and high quality
  • Easy to use
  • Exquisite Workmanship
  • Well Made
  • Best Choice and best discounts
  • Customer Care is Our Top Priority
  • Offer is Subject to Availability
  • Big Sale

What’s in the box

1*Base board 1* 35mm Wheels 1* Rubber Wheel bands 1* AA holder 2*Gearded Motors 1*Screw set 1*LM393 Chipset 1*8pin DIP Socket 10*Resistor 2*Electrolytic capacitor 2*Light dependant resistors 2*Transitors 2*White LED 2*Red LED 1* switch 4*70mm Leads

Specifications

  • SKU: GE779EA252TQFNAFAMZ
  • Product Line: Fouani Nigeria
  • Model: JMVANLIN505830
  • Production Country: China
  • Size (L x W x H cm): 15 x 9 x 2
  • Weight (kg): 0.1
  • Certifications: Organic
  • Color: Multicolor
  • Main Material: 1
  • From the Manufacturer: 1
  • Care Label: 1
  • Shop Type: Jumia Mall

Verified Customer Feedback

Customers who have bought this product have not yet posted comments

2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino

2WD Smart Car Tracking Robot Car Chassis DIY Kit Reduction Motor Set For Arduino

₦ 13,100
₦ 26,10050%
Questions about this product?

Recently Viewed

See All