This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeLarge Appliances & Home ImprovementElectrical ToolsTestersCircuit Testers2S 7.4V Solar Lamp Circuit Board Continuous Current 20A Vacu
₦ 3,874
₦ 7,74950%
In stock
+ shipping from ₦ 1,488 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 1,488
Arriving at pickup station between 04 June & 10 June when you order within next 9hrs 40mins
Door Delivery
Delivery Fees ₦ 1,768
Ready for delivery between 04 June & 10 June when you order within next 9hrs 40mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
KKPerfect
54%Seller Score
124 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Average
Customer Rating: Good
Product details
Detailed Information About The Product:
1. The difference between the split port and the same port: the default charging current of the split port is 5A, and the positive and negative poles of charging and discharging should be separated; the charging current of the same port is as large as the discharging current, and the charging and discharging are on the same positive and negative levels.
2. Without equalization and with equalization: equalization is to discharge the high-voltage battery cells with resistance when charging, and wait for the low-voltage battery cells to charge up the voltage, so as to achieve the consistency of each voltage and voltage, and improve the performance of the whole battery pack.
3. Before installing the protection board, the batteries must be well matched (the voltage difference of each battery is not higher than 0.05V, the internal resistance difference is not more than 5mohm, and the capacity difference is lower than 30mAh). The better the consistency of the battery, the farther the running distance will be. The working performance of the protection board reaches the best.
4. Connect the batteries in parallel first and then in series, and make sure that the welding is correct (18650 batteries are spot-welded with nickel sheets, and other batteries are welded with solder). Do not use screws to screw the IC on the protection board.
5. Please note or want to leave a message to explain whether you are using a polymer (ternary lithium, lithium cobalt oxide, lithium manganese oxide) battery 3.7V or a lithium iron phosphate battery 3.2V, so as to ensure that the protection board we send is suitable for your battery.
Colour:black
Material:plastic
Package Contents:
1 x Solar Lamp Circuit Board
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
1. The difference between the split port and the same port: the default charging current of the split port is 5A, and the positive and negative poles of charging and discharging should be separated; the charging current of the same port is as large as the discharging current, and the charging and discharging are on the same positive and negative levels.
2. Without equalization and with equalization: equalization is to discharge the high-voltage battery cells with resistance when charging, and wait for the low-voltage battery cells to charge up the voltage, so as to achieve the consistency of each voltage and voltage, and improve the performance of the whole battery pack.
3. Before installing the protection board, the batteries must be well matched (the voltage difference of each battery is not higher than 0.05V, the internal resistance difference is not more than 5mohm, and the capacity difference is lower than 30mAh). The better the consistency of the battery, the farther the running distance will be. The working performance of the protection board reaches the best.
4. Connect the batteries in parallel first and then in series, and make sure that the welding is correct (18650 batteries are spot-welded with nickel sheets, and other batteries are welded with solder). Do not use screws to screw the IC on the protection board.
5. Please note or want to leave a message to explain whether you are using a polymer (ternary lithium, lithium cobalt oxide, lithium manganese oxide) battery 3.7V or a lithium iron phosphate battery 3.2V, so as to ensure that the protection board we send is suitable for your battery.
Colour:black
Material:plastic
Package Contents:
1 x Solar Lamp Circuit Board
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
Specifications
Key Features
- Durable and good quality
- Solar light protection board
- vacuum cleaner
- protection board
- light protection board
- Solar Lamp Circuit Board
- The details are as described above
What’s in the box
1 x Solar Lamp Circuit Board
Specifications
- SKU: GE779IP3DI0P3NAFAMZ
- Model: Solar street light protection board
- Production Country: China
- Size (L x W x H cm): 6x3x1
- Weight (kg): 0.02
- Color: Black
- Main Material: plastic
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
2S 7.4V Solar Lamp Circuit Board Continuous Current 20A Vacu
₦ 3,874
₦ 7,74950%
Questions about this product?