Share this product

Shipped from abroad

2.5 3.5 SATA IDE To USB Adapter Cable Lead

₦ 28,550

₦ 37,11023%

Few units left

+ shipping from ₦ 5,246 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

Shipped from abroad

Delivery Fees ₦ 5,246

Arriving at pickup station between 21 May & 27 May when you order within next 22hrs 8mins

Delivery Fees ₦ 5,616

Ready for delivery between 21 May & 27 May when you order within next 22hrs 8mins

Free return within 7 days for ALL eligible itemsDetails

TomDSF

98%Seller Score

3 Followers

Quality Score: Excellent

2.5 3.5 SATA IDE to USB Adapter Cable Lead For Hard Disk Drive HDD CD DVD RW Rom for Computer PC Converter Laptop Cable Description:

2.5/3.5'' IDE SATA to USB Hard Drive HD HDD Adapter Converter Cable
This Unit does not require External Power Adapter if you are going to connect 2.5" IDE Hard Disk drive， but for any other devices such as 3.5" IDE， SATA Hard Disk Drive or CD-RW， DVD-RW， CD Rom， DVD Rom it will require external Power Adapter. External power adapter is not included in the package.

Features:

Easy to data backup and exchange USB 2.0 compliant Windows XP/VISTA/7/8/10， Mac compatible don't need The drive
Hi-Speed USB interface provides for easy installation with its plug and play design
Support hot plug， plug and play.
One IDE 40 Pin Port for internal CDRW， DVDRW， CD Rom， DVD Rom， 2.5"/3.5" Hard disk， COMBO device and etc
Turns SATA/IDE drive into a convenient external drive， could be used as a bridge to connect SATA 3.5" hard disk，2.5" & 3.5" IDE hard disk， CD-ROM， DVD-ROM， CD-RW， COMBO device， DVD-RW to computer with USB 2.0 interface (Not Suitable for 2.5" SATA HDD).
USB2.0 interface， 480 Mbps high speed data transfer rate. 52X CD-ROM Supported. Supports Hard Disk， CD-ROM， DVD-ROM， CD-RW， Combo Device and DVD-RW to computer with USB 2.0 interface
Quickly access SATA / IDE 3.5" (40-pin)
IDE 2.5" (44-pin) device by USB port

ant Note:

2. You are required to connect the external power for 3.5” IDE & SATA HDD. And please always remember to remove the external power adapter and disconnect it from the connection if you do not use the hard disk.
1. Please set jumper wire to the MASTER mode of your hard disk.

Package Contents: