100mm X 10m X 0.13mm

The surface is smooth and it is not easy to adhere to any substance. Easy to clean all kinds of stains, or attachments on the surface.
Chemical resistance, resistance to strong acid, alkali, aqua regia and various organic solvents.
Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the bag.
Long Service Time Temperature -70°C to 260 °C,Fits virtually all Food-Saver, Weston, Cabella's, Nesco and Seal-A-Meal vacuum sealers.
Just peel tape from the roll and place on the correct area. Over the wire for vacuum sealers, under the wire for impulse sealers.
Specifications:
Color: Brown
Tape Type: Electrical Tape
Width: 10/20/30/40/50mm/100mm
Length: 10m
Thickness: 0.13 mm/0.18mm
Temperature Resistance:70 ~ 260 Degrees Celsius
Features: Wear Resistant,High Temperature Resistant,Insulating, Retardant, etc
Application:
1.Insulation of wires, cables and coils (for Type H electrical insulation)
2.Feeding material
3.Sliding material for rails
4.Isolation material for heat sealing
5.Prevent adhesion of glue and
6.For the removal of wood molds and plastic forming dies
7.Paper feeding tape for fax machines
8.Copier rails
9.Gasket material
10.Gaskets that are exposed to corrosive chemicals
11. of various mechanical sliding surface
12. etc
Usage Method:
1) Simply remove the tape on your current heating element (make sure to get the residue from the old tape off).
2) Cut your new replacement tape to the correct size.
3) Remove the yellow backing from the tape and place over the heating element (under the element if using for an impulse sealer). Smooth out the tape with your finger as you go, to ensure a good bond.
Package included:
1 Roll * Teflon Tape