This EZ Chill refrigerant kit refill has a specially designed formula of R-134a and additives. The approximately 10 oz. of R-134a and 1 oz. of additives are used to recharge a vehicle's A/C system and seal common leaks in the A/C system's rubber components. This product is formulated for use in all R-134a systems.

Contains approximately 10 oz. of R-134a and 1 oz. of additivesContains leak sealer to seal common A/C leaks in rubber hoses, gaskets, and O-ringsFor use in vehicles with R-134a compatible A/C systemsFormula helps to prevent future loss of refrigerantEPA compliant self-sealing valve closes when dispenser is disconnected (requires adapter or EPA compliant hose)

Product Features

All-in-one solution – no additional tools requiredReplaces lost R-134a refrigerant and oil in automotive A/C systemSystem-safe leak sealer additive seals common A/C leaks in rubber hoses, gaskets and O-ringsBuilt-in disposable recharge hose in a shelf-saver cap

Usage Directions

Shake can well. Start engine and set A/C to maximum cooling.Locate A/C low-side service port and connect recharge hose.Depress the top button. Allow contents to flow into the A/C.While charging, rotate can between 12 o’clock and 3 o’clock every two to three seconds while continually agitating (shaking) the can back and forth.Continue this process until the can is empty (five to 15 minutes) or until the correct amount of refrigerant is charged into the A/C system.When the can feels empty, hold it upside down for one minute to dispense remaining contents before removing from service port. DO NOT OVERCHARGE SYSTEM!

Available Size 

13 oz.