This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeElectronicsAccessories & SuppliesCamera AccessoriesLens AccessoriesZOMEi Lotus Lens Lens hood Suitable for SLR DV Camera WSC4
₦ 5,611
₦ 9,82043%
4 units left
+ shipping from ₦ 1,232 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 1,232
Arriving at pickup station between 20 May & 24 May when you order within next 17hrs 21mins
Door Delivery
Delivery Fees ₦ 1,602
Ready for delivery between 20 May & 24 May when you order within next 17hrs 21mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
TeloyKi
54%Seller Score
21 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Average
Product details
Detailed Information About The Product:
The design of the lens hood is basically designed to prevent unwanted external light from penetrating the lens, extending and blocking at the end of the lens;The dedicated lens hood is designed to match the focal length of its design lens.Suitable for most UV lenses.
Stop rays entering the lens in the extreme corner and reflecting in the lens.In the backlight, side light or flash photography, non-imaging light can be prevented from entering and smog can be avoided.
In the smooth and sidelight photography, it is possible to avoid scattered light from entering the lens.In light photography or night photography, ambient light can be prevented from entering the lens.
It can prevent accidental damage to the lens, and it can also prevent the finger from touching the lens surface by mistake. It can also shield the lens from wind, sand and snow.
Hoods are widely used in backlight photography and, in general, glare can be avoided. However, if the light source is close, glare may still occur. At this point, the hood can be blocked by hand on the side where the light source is located. Glare is eliminated, it is necessary to observe clearly from the viewfinder
Item color: black
Material: High-quality rubber
lens hood Size: 77mm
Product weight: 25g{including packaging}
Package Included:
1 * lens hood
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
8420. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
The design of the lens hood is basically designed to prevent unwanted external light from penetrating the lens, extending and blocking at the end of the lens;The dedicated lens hood is designed to match the focal length of its design lens.Suitable for most UV lenses.
Stop rays entering the lens in the extreme corner and reflecting in the lens.In the backlight, side light or flash photography, non-imaging light can be prevented from entering and smog can be avoided.
In the smooth and sidelight photography, it is possible to avoid scattered light from entering the lens.In light photography or night photography, ambient light can be prevented from entering the lens.
It can prevent accidental damage to the lens, and it can also prevent the finger from touching the lens surface by mistake. It can also shield the lens from wind, sand and snow.
Hoods are widely used in backlight photography and, in general, glare can be avoided. However, if the light source is close, glare may still occur. At this point, the hood can be blocked by hand on the side where the light source is located. Glare is eliminated, it is necessary to observe clearly from the viewfinder
Item color: black
Material: High-quality rubber
lens hood Size: 77mm
Product weight: 25g{including packaging}
Package Included:
1 * lens hood
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
8420. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Specifications
Key Features
- Durable and good quality
- The design of the lens hood is basically designed to prevent unwanted external light from penetrating the lens, extending and blocking at the end of the lens;The dedicated lens hood is designed to match the focal length of its design lens.Suitable for most UV lenses.
- Stop rays entering the lens in the extreme corner and reflecting in the lens.In the backlight, side light or flash photography, non-imaging light can be prevented from entering and smog can be avoided.
- In the smooth and sidelight photography, it is possible to avoid scattered light from entering the lens.In light photography or night photography, ambient light can be prevented from entering the lens.
- It can prevent accidental damage to the lens, and it can also prevent the finger from touching the lens surface by mistake. It can also shield the lens from wind, sand and snow.
- Hoods are widely used in backlight photography and, in general, glare can be avoided. However, if the light source is close, glare may still occur. At this point, the hood can be blocked by hand on the side where the light source is located. Glare is eliminated, it is necessary to observe clearly from the viewfinder
- The details are as described above
What’s in the box
1 * lens hood
Specifications
- SKU: 91368EA4M3E23NAFAMZ
- Model: Zomei Lotus Lens Lens Hood
- Production Country: China
- Size (L x W x H cm): 10.5x10x5.6
- Weight (kg): 0.053999999999999999
- Color: black
- Main Material: rubber
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
915 Generation ZOMEi Lotus Lens Lens hood Suitable for SLR DV Camera WSC4
₦ 5,611
₦ 9,82043%
Questions about this product?