product_image_name-915 Generation-CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator-1product_image_name-915 Generation-CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator-2product_image_name-915 Generation-CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator-3product_image_name-915 Generation-CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator-4product_image_name-915 Generation-CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator-5product_image_name-915 Generation-CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator-6

Share this product

Shipped from abroad

915 Generation CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator

₦ 83,199
₦ 153,92446%

2 units left

+ shipping from ₦ 15,370 to LEKKI-AJAH (SANGOTEDO)

Promotions

Delivery & Returns

Shipped from abroad 

Choose your location

Pickup Station

Delivery Fees ₦ 15,370
Arriving at pickup station between 03 June & 07 June when you order within next 8hrs 17mins

Door Delivery

Delivery Fees ₦ 15,650
Ready for delivery between 03 June & 07 June when you order within next 8hrs 17mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Warranty

None

Seller Information

Leisure

20%Seller Score

31 Followers

Follow

Seller Performance

Order Fulfillment Rate: Very Poor

Quality Score: Very Poor

Customer Rating: Average

Product details

Detailed Information About The Product:

Works fine to carbonate beer, water, tea, or any other beverage.
Constructed with aluminum and plastic for strength and longevity.
Insert the CO2 cartridge, set the dial to your desired PSI, and attach to your keg.
Included disconnect ensures a tight seal every time.
0-90 PSI gauge on regulator is accurate, not recommended for use with nitrogen.

Continue to dispense pressure into your keg while away from home with this lightweight CO2 charg-er.
Lightweight construction to keep your mobile setup simple.
Portable size allows you to bring to any outdoor barbeque, party, or get together.
The 5/16inch gas line assembly is made of 1m of white 5/16inch tubing attached to a ball lock disconnect.
Simply clamp the open end of the tubing to your regulator or CO2 distribution block and hook up the disconnect fitting onto your keg and you are ready to pressurize and dispense your homebrewed beer.
This gas line comes fully assembled with one loose clamp to attach your gas line.
Name: CO2 Charger
Thread: Tr21 x 4
colour: as shown
Material: aluminum + plastic

Package Contents:
1 x 1meter 5/16inch Hose
1 x CO2 Charger

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3973. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !

Specifications

Key Features

  • Durable and good quality
  • Works fine to carbonate beer, water, tea, or any other beverage.
  • Constructed with aluminum and plastic for strength and longevity.
  • Insert the CO2 cartridge, set the dial to your desired PSI, and attach to your keg.
  • Included disconnect ensures a tight seal every time.
  • 0-90 PSI gauge on regulator is accurate, not recommended for use with nitrogen.
  • The details are as described above

What’s in the box

1 x 1meter 5/16inch Hose
1 x CO2 Charger

Specifications

  • SKU: 91368HA420MMDNAFAMZ
  • Model: Bar Wine Accessories
  • Production Country: China
  • Size (L x W x H cm): 23x18x9
  • Weight (kg): 0.443
  • Color: as shown
  • Main Material: aluminum + plastic

Verified Customer Feedback

Customers who have bought this product have not yet posted comments

915 Generation CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator

915 Generation CO2 Gas Charger 0-90 PSI for Soda Water Beer Kegerator

₦ 83,199
₦ 153,92446%
Questions about this product?

Recently Viewed

See All