This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeIndustrial & ScientificAdditive Manufacturing Products3D Printer Parts & Accessories3D Printer Accessories3D Printer Parts Pin 27 Tools Mini Upgrade Touch Breakout
₦ 5,043
₦ 10,07050%
4 units left
+ shipping from ₦ 1,693 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 1,693
Arriving at pickup station between 03 June & 07 June when you order within next 7hrs 1mins
Door Delivery
Delivery Fees ₦ 1,973
Ready for delivery between 03 June & 07 June when you order within next 7hrs 1mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
Leisure
20%Seller Score
31 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Very Poor
Customer Rating: Average
Product details
Detailed Information About The Product:
Improved design with wider power channels
With this adapter, no wires need to be cut!! Simply connect this between your board and your cable, attach the 3 bltouch wires and upgrade your firmware.
Compatible with:
Ender 3
Ender 3 Pro
Ender 5
CR-10 Mini
CR-10
Incompatible with:
ANet A8
Ender 2
Ender 4
CR-8
Ensure you connect BLTouch's 3 pins per the labeling on the board.
You must have a Bootloader flashed to your Ender 3 Board in order to use this. Support for that is not provided.
Attention:
The pin 27 board makes installing a bltouch or filament sensor fast and easy. Normally you would need to cut the ribbon cable and solder into the pin 27 but with the board its plug and play.(after firmware update)
Make sure to check your wire configuration on your bltouch or filament sensor. The new bltouch sensors should plug right into the board without depining the connector.
Left to right: Brown-Ground, Red-5v, Yellow/Orange-Signal
Disconnect lcd ribbon ext1 on the control board
Connect Ext1 to the pin 27 board
Connect bltouch to the 3 pins on the pin 27 board. Left to right: Brown-Ground, Red-5v, Yellow-Signal
Connect the pin27 to the main board. Make sure to align the header pins from the pin 27 to the main board.
Colour:As shown
Material:PC+Metal
Package Contents:
2 x pin 27 board adapter board
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Improved design with wider power channels
With this adapter, no wires need to be cut!! Simply connect this between your board and your cable, attach the 3 bltouch wires and upgrade your firmware.
Compatible with:
Ender 3
Ender 3 Pro
Ender 5
CR-10 Mini
CR-10
Incompatible with:
ANet A8
Ender 2
Ender 4
CR-8
Ensure you connect BLTouch's 3 pins per the labeling on the board.
You must have a Bootloader flashed to your Ender 3 Board in order to use this. Support for that is not provided.
Attention:
The pin 27 board makes installing a bltouch or filament sensor fast and easy. Normally you would need to cut the ribbon cable and solder into the pin 27 but with the board its plug and play.(after firmware update)
Make sure to check your wire configuration on your bltouch or filament sensor. The new bltouch sensors should plug right into the board without depining the connector.
Left to right: Brown-Ground, Red-5v, Yellow/Orange-Signal
Disconnect lcd ribbon ext1 on the control board
Connect Ext1 to the pin 27 board
Connect bltouch to the 3 pins on the pin 27 board. Left to right: Brown-Ground, Red-5v, Yellow-Signal
Connect the pin27 to the main board. Make sure to align the header pins from the pin 27 to the main board.
Colour:As shown
Material:PC+Metal
Package Contents:
2 x pin 27 board adapter board
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Specifications
Key Features
- Durable and good quality
- 3D Printer Parts
- Pin 27 Tools
- Mini Upgrade Touch Breakout
- Touch Breakout Adaptor
- For Creality
- The details are as described above
What’s in the box
2 x pin 27 board adapter board
Specifications
- SKU: 91368IP4Y2IF5NAFAMZ
- Model: Printer Parts
- Production Country: China
- Size (L x W x H cm): 7x4x3
- Weight (kg): 0.0115
- Color: multicolor
- Main Material: PC+Metal
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
915 Generation 3D Printer Parts Pin 27 Tools Mini Upgrade Touch Breakout
₦ 5,043
₦ 10,07050%
Questions about this product?