This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeAutomobileMotorcycle & PowersportsPartsDrive Train4G & 5G Base HAT Expansion Card for RM500Q/SIM8200/GM800
₦ 17,285
₦ 32,83847%
1 units left
+ shipping from ₦ 3,275 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 3,275
Arriving at pickup station between 04 June & 10 June when you order within next 19hrs 48mins
Door Delivery
Delivery Fees ₦ 3,645
Ready for delivery between 04 June & 10 June when you order within next 19hrs 48mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
spring rain
94%Seller Score
19 Followers
Seller Performance
Order Fulfillment Rate: Excellent
Quality Score: Excellent
Customer Rating: Good
Product details
Detailed Information About The Product:
1. Fully compatible for Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+)
2. Supports the following brand M.2 5G Modules: for Quectel: RM500Q RM500U; for Gosuncn: GM800; for Sierra: SIM8200
3. Compatible the following brand Boards: for Raspberry Pi 4, 3, 2, B+; for Asus Tinker Board; for Rock 64*; for Samsung ARTIK's board; for Latte Panda
4. Clip-in M.2 socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
5. MANO SIM Card socket can easily reachable on the upside of the HAT. Efficient and low quiescent current power circuit can hold up to 3Amps
Product name: M.2 expansion card for Raspberry Pi
Working temperature range: -40°C ~ 80°C
Product size: 85 x 56mm
Note 1: The Base HAT doesn't need driver. Rather The host computer(such as RPi, Asus Tinker Board) needs the driver of the compatible module that will be used with the Base HAT. For example, if you are using Quectel's EC25 with the Base HAT, then your host device should have the driver for Quectel EC25. Nowadays, most of the Linux kernel comes with the required drivers installed as a result the modules are recognized.
Note 2: These compatibility list created by assuming you've connected the Base HAT to the device via USB. UART communication can be work with every device in the list easily which have 3.3V level UART port.
color:Black
Material:PCB
Package Contents:
1 x 5G/4G<E Base HAT
1 x USB 2.0 to TYPE C Cable
1 x USB 3.0 to USB 3.0 Cable
1 x Screw Driver
8 x copper nut
8 x M2.5 screw
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
1237. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
1. Fully compatible for Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+)
2. Supports the following brand M.2 5G Modules: for Quectel: RM500Q RM500U; for Gosuncn: GM800; for Sierra: SIM8200
3. Compatible the following brand Boards: for Raspberry Pi 4, 3, 2, B+; for Asus Tinker Board; for Rock 64*; for Samsung ARTIK's board; for Latte Panda
4. Clip-in M.2 socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
5. MANO SIM Card socket can easily reachable on the upside of the HAT. Efficient and low quiescent current power circuit can hold up to 3Amps
Product name: M.2 expansion card for Raspberry Pi
Working temperature range: -40°C ~ 80°C
Product size: 85 x 56mm
Note 1: The Base HAT doesn't need driver. Rather The host computer(such as RPi, Asus Tinker Board) needs the driver of the compatible module that will be used with the Base HAT. For example, if you are using Quectel's EC25 with the Base HAT, then your host device should have the driver for Quectel EC25. Nowadays, most of the Linux kernel comes with the required drivers installed as a result the modules are recognized.
Note 2: These compatibility list created by assuming you've connected the Base HAT to the device via USB. UART communication can be work with every device in the list easily which have 3.3V level UART port.
color:Black
Material:PCB
Package Contents:
1 x 5G/4G<E Base HAT
1 x USB 2.0 to TYPE C Cable
1 x USB 3.0 to USB 3.0 Cable
1 x Screw Driver
8 x copper nut
8 x M2.5 screw
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
1237. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Specifications
Key Features
- Durable and good quality
- 1. Fully compatible for Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+)
- 2. Supports the following brand M.2 5G Modules: for Quectel: RM500Q RM500U; for Gosuncn: GM800; for Sierra: SIM8200
- 3. Compatible the following brand Boards: for Raspberry Pi 4, 3, 2, B+; for Asus Tinker Board; for Rock 64*; for Samsung ARTIK's board; for Latte Panda
- 4. Clip-in M.2 socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
- 5. MANO SIM Card socket can easily reachable on the upside of the HAT. Efficient and low quiescent current power circuit can hold up to 3Amps
- The details are as described above
What’s in the box
1 x 5G/4G<E Base HAT
1 x USB 2.0 to TYPE C Cable
1 x USB 3.0 to USB 3.0 Cable
1 x Screw Driver
8 x copper nut
8 x M2.5 screw
1 x USB 2.0 to TYPE C Cable
1 x USB 3.0 to USB 3.0 Cable
1 x Screw Driver
8 x copper nut
8 x M2.5 screw
Specifications
- SKU: 91368VP4T3PRPNAFAMZ
- Model: Expansion Card
- Production Country: China
- Size (L x W x H cm): 17x11x3
- Weight (kg): 0.124
- Color: Black
- Main Material: PCB
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
915 Generation 4G & 5G Base HAT Expansion Card for RM500Q/SIM8200/GM800
₦ 17,285
₦ 32,83847%
Questions about this product?