XH-M240/XH-M239 /Type-C LCD Display Battery Capacity Tester

XH-M240/XH-M239 /Type-C LCD Display Battery Capacity Tester MAh MWh 18650 Lithium Battery Digital Measurement Lithium Battery

XH-M240

Measurement accuracy: 1AH Power supply: DC5-12v /18650 battery Standby current: 5-7mA Discharge current: about 500mA Load: 10w 8 How to use: 1: Put in the power supply battery to test the battery, turn on the power switch and display 4.1u, that is, the voltage of the test battery is 4.1v 2:Set termination voltage:Pre + or - to display the termination voltage, and pre + or - to set the termination voltage.(default: 3V) 3: Pre the start on to start discharging (discharge current is about 500mA). At this time, the LED displays to detect the remaining battery voltage of 4V 4: Pre the battery voltage switch key to mAh , display the discharged 20mAh 5: Pre the second on to display 77mWH discharge in mW 6: When the discharge is completed, the display has been discharged 1900mAH, the red indicator light above the reset key is flashing state Package include: 1Pc*18650 lithium battery Capacity tester

Type-c

1: Wide range of applications

2: Added charging function

3: Exquisite and compact appearance

4: LCD display

5: Preset three working modes

18650 battery capacity tester LCD display (with charging function) type-c port

Test voltage: ≤5V

Display mode: 128×64px LCD

Capacity range: 99999mAh

Energy range: 99999mWh

Timing range: 999:59:59

Working battery: Flat head 18650 battery

Power interface: Type-C

External working power supply: 5V 1A (power supply is self-contained, just use a mobile phone charger.) The charging mode (Charge) and the automatic mode (AUTO-TEST) need to be connected to an external working power supply for normal use.

Product size: 115×81×31mm (product); 150×100×40mm (packaging),

Product weight: 110g (including packaging); net weight 74g

Safety reminder: The load resistor will release a high temperature of 60~80℃ during discharge. Keep ventilation when using it, avoid close to flammable and substances, and notify you to pay attention to safety and avoid burns.

Working mode (need to connect to 5V power supply)

AUTO-TEST automatic mode (power-on default mode)

Start → charge (charge current le than 0.12A, trier full charge, stop charging) → discharge (load voltage le than 2.7V, trier discharge complete) → charge (charge current le than 0.12A trier full charge, stop charging) → complete stop

①The capacity and energy value are not recorded during charging, only the time is counted.

② Record the capacity and energy value during discharge, both are timing.

CHARGE (Charge Mode)

Start → charge (charging current is le than 0.12A to trier full charge, stop charging) → complete stop

①Only record the charging time, not the charging capacity and energy

DISCHARGE (discharge mode)

Start → discharge (load voltage is le than 2.7V, trier discharge complete → complete stop)

①Record the discharge capacity, energy and time.

Note:

①During the discharge proce, as long as it detects that the battery load voltage drops to 2.7V, the discharge will stop. Ar the discharge is stopped, the battery is no-loaded, and the voltage will rise; a single discharge proce can only detect that the voltage drops to 2.7V for the first time ar the start of self-discharge to trier the stop of discharge. The capacity released by the first-stage battery can be simply understood as a single usable capacity, rather than the rated battery capacity.

② Shut down and restart; switch modes; long pre the start on to clear all data, and shutdown does not save historical data.

③Test ① install 18650 battery for testing, Test ② use type-c external or ≤5V power supply for testing, but Test ① and Test ② cannot be used for testing at the same time, to avoid accidents caused by overshoot of 18650 battery without protection.

④ To run the charging mode, an external working power supply is required.

Package List :

1*Battery capacity detector

XH-M239

1: Wide range of applications

2: Small appearance

3: Simple to use and easy to understand

4: Measurement accuracy: 1mAH

5: Intelligent control, clear LCD display, accurate measurement

Product name: 18650 lithium battery capacity tester

Product Model: XH-M239

Display accuracy: 0.1

Measurement accuracy: 1mAH

Power supply voltage: DC5-12V/18650 battery (delivery without battery)

Standby current: 5mA

Discharge current: about 500mA

Load power: 10W 8Ω

Appearance size: 111*97*25mm

Product weight: 93g

Package List :

1*Tester module

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.