XH-M239 18650 Lithium Battery Capacity Tester Module High

18650 Lithium Battery Capacity Tester Module High Precision XH-M239 LCD Digital Display True Capacity Module MaH/mwH Measurement

Product selling points:

1: Widely used

2: Compact appearance

3: Easy to use and understand

4: Measurement accuracy: 1mah

5: Intelligent control, clear LCD display, accurate measurement Note:the battery on the left is the power supply on the circuit, and the battery on the right is the test.

Features:

Product Name: 18650 lithium battery capacity tester

Product model: xh-m239

Display accuracy: 0.1

Measurement accuracy: 1mah

Power supply voltage: dc5-12v / 18650 battery (delivered without battery)

Standby current: 5mA

Discharge current: About 500mA

Load power: 10W 8 Ω

Appearance dimension: 111 * 97 * 25MM

Product weight: 93g

Product selling point:

1: Widely used

2: Added charging function

3: Exquisite and small appearance

4: LCD display

5: Preset three working modes

18650 battery capacity tester LCD display (with charging function) type-c port

Test voltage: ≤5V

Display mode: 128×64px LCD

Capacity range: 99999mAh

Energy range: 99999mWh

Timing range: 999:59:59

Working battery: flat head 18650 battery

Power interface: Type-C

External working power supply: 5V 1A (the power supply is self-provided, you can use the mobile phone charger). The charging mode (Charge) and automatic mode (AUTO-TEST) need to be connected to an external working power supply for normal use.

Product size: 115×81×31mm (product); 150×100×40mm (packaging),

Product weight: 110g (including packaging); net weight 74g

Safety Tips: The load resistance will release a high temperature of 60~80℃ during discharge. Keep ventilation during use, avoid close to flammable and materials, and notify you to pay attention to safety and avoid burns.

Working mode (need to connect to 5V power supply)

AUTO-TEST automatic mode (boot default mode)

Start → charge (charge current is le than 0.12A, trier full charge, stop charging) → discharge (load voltage is le than 2.7V, trier discharge complete) → charge (charge current le than 0.12A trier full charge, stop charging) → complete stop

①The capacity and energy values are not recorded during charging, only timing.

②Record the capacity and energy value when discharging, the same is timing.

CHARGE (charging mode)

Start → charge (the charging current is le than 0.12A to trier full charge and stop charging) → complete stop

①Only record the charging time, not the charging capacity and energy

DISCHARGE (discharge mode)

Start → discharge (load voltage is le than 2.7V, trier discharge is completed → complete stop)

①Record the discharge capacity, energy and time.

1: Specially used to measure 18650 battery capacity

2: The integration of charging and discharging eliminates the tedious operation of disaembling and aembling the battery to replace the charging and discharging of the device

3: The size of the discharge current can be switched and it is convenient to use

4: Small size, easy to carry

5: stable performance

This product is a 18650 battery capacity tester, which is specially used to measure the capacity of 18650 batteries. The 1.77-inch TFT display can simultaneously display information such as battery internal resistance, capacity, voltage, current, power, etc.; The tedious operation of charging and discharging equipment; preset three modes of automatic, charging and discharging, ar selecting the corresponding mode, start the equipment, and the program will run automatically; the size of the discharge current can be switched for convenience.

technical parameter

①Install the power supply 18650 battery and the 18650 battery to be tested;

②Use the Type-C data cable to connect the Type-C power supply port to the 5V power supply. The external power supply is used to charge the battery in the CHG state. If you only need to discharge the DSG, you can leave it unconnected;

③Select the mode, the default is AUTO automatic mode;

④Click the Start on to start the program;

⑤Wait for the proce to end and the status indication to stop.

About power-off storage:

This product has no power-off storage function. Shutting down, restarting, and switching the working mode can cause the accumulated data to be cleared (as shown below).

01

It can be used well

The working mode corresponds to the state change

Product name: 18650 battery capacity internal resistance tester charging and discharging integrated version

Working voltage: DC5V

Detection voltage: ≤DC5V

Capacity measurement range: 0~99999mAh

Energy measurement range: 0~99999mWh

Battery internal resistance measurement: support, measurement error is about 10%

Display real-time voltage: support

Display real-time current: support

Display real-time power: support

Log run time: support

Working mode indication: support

Current Status Indication: Supported

Simultaneous discharge: not supported (simultaneous discharge of 18650 battery Test① and external power supply Test② is not supported)

Discharge load: 10W 8ΩJ cement resistance × 2

Discharge current selection: ≈0.5A or ≈1A

Charging interface: Type-C

External discharge interface: Type-C

Preset discharge stop voltage: 3V (not adjustable)

Preset full stop voltage: 4.2V (not adjustable)

Data storage: The measurement data is not saved, and the accumulated data is automatically cleared when the power is turned off or when the working mode is switched.

Product size: 108×85×24mm

Product weight: 80g (net weight)

Charge and discharge time reference:

AUTO (automatic mode): The battery (discharged in advance) is charged ~ the default current is about 1A to discharge 1704mAh ~ it is fully charged again to trier the program to stop, which takes 437 minutes and 23 seconds.

DSG (discharge mode): When the battery is fully charged, it uses a current of about 1A to discharge 1681mAh, which takes 118 minutes and 55 seconds.

CHG (Charging Mode): The capacity and energy are not measured during charging, only the time is recorded, which takes 164 minutes and 51 seconds

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.