VSTM OBD II Vehicle ECU Emergency Power Supply Cable Memory

↑ ↑

• Compared by most of OBD metal pins in market with zinc plating, ours are gold plating. Better reliable on contact and electric transmission. Compared by most of OBD II Memory Saver (or Automotive Computer Memory Saver) in market with 3 ~ 5 ft in cable length, ours with super long 10 ft (3meters) cable. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand
• 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one.
• Late-model vehicles, however, rely on computers that operate everything from the stereo to the transmission. If power is lost to the computer, the settings are lost and have to reset to default. That means the vehicle may feel different when driven, and you may have to enter a security code to access the stereo.
• Using this simple memory saving device when replacing your car battery will help you avoid these problems. This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
• As our device with 3 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from of another good car. Just insert the plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. You can replace the battery.

Product Description

Product Description and Operation:

1. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.
2. Interface connector between a 12V DC power source and vehicle's OBD II port.
3. Preserves vehicle codes and electronic presets.
4. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one. Late-model vehicles, however, rely on computers that operate everything from the stereo to the transmission. If power is lost to the computer, the settings are lost and have to reset to default. That means the vehicle may feel different when driven, and you may have to enter a security code to access the stereo. Using this simple memory saving device when replacing your car battery will help you avoid these problems.
5. This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet.
6. As our device with 3 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from of another good car. Just insert the plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. And now you can replace the battery.
7. As typical OBD Auto Memory saver not have Anti-protection on Incorrect Polarity (AIP), so that in case a wrong polarity power input, it will probably damage your auto ECU (Electronic Control Unit). For our Newly Upgraded Version OBD Auto Memory Saver, it has been added the Safety Function of AIP; In case a power input with incorrect polarity, AIP function automatically put into effect (electric power can’t be transmitted to your car, in case wrong polarity power input); as well, led light on memory saver will not light up. So that your car ECU and other electric devices are fully under protection during a wrong power connection.

VSTM ecu emergency power supply cable memory save to help you solve the embarrassing situation!

So what are you going to do, just wait around for a tow? No. You can handle this, even without a high level of mechanical skill. If you know how to change a tire, you can deal with this. And if you know it’s going to happen, there’s no reason to be unprepared——VSTM ECU Emergency Power Supply Cable Memory Save

Troubleshooting:

• The 12V DC plug of memory should be correctly connected 12V power source, if not, the red led light on the plug will not light up; that means no power signal from the power source or with incorrect polarity connection. If the power source from another car, then check whether the car’s on good condition or not. If the power source from a jump starter, then verify if the cause is from the contact. If the power source is from an alternative 12V Lead-acid battery, then check whether the polarity correct or not.
• The memory saver 12V DC plug contains an 8 amp Should a problem arise with the memory saver, check the fuse or contact your direct seller/distributor for assistance.