This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeLarge Appliances & Home ImprovementHome Improvement HardwareOcckic Automatic Solar Panel Battery Charger Board Night Light LED Lamp Control Switch Garden Street light 3.7V 7.4V 11.1V Module
/product/31/0867572/1.jpg?7495)
Share this product
Shipped from abroad
Occkic Automatic Solar Panel Battery Charger Board Night Light LED Lamp Control Switch Garden Street light 3.7V 7.4V 11.1V Module
₦ 25,515
₦ 35,77529%
In stock
+ shipping from ₦ 5,275 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 5,275
Arriving at pickup station between 28 June & 04 July when you order within next 22hrs 7mins
Door Delivery
Delivery Fees ₦ 5,555
Ready for delivery between 28 June & 04 July when you order within next 22hrs 7mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
housewaresstore
98%Seller Score
Be the first to follow
Seller Performance
Order Fulfillment Rate: Excellent
Quality Score: Excellent
Product details
Wiring:
1: Connect the lithium battery
The battery must have a corresponding voltage protection board
2: Access LED
At this time, the LED is on (if it is not on, you can short T+T- to test)
3: Connect to the solar panel. At this time, the solar panel is illuminated with light, and the LED is turned off without light illumination.
Precautions:
1: The stable working output current of the control board cannot be greater than 3A, otherwise it may cause output protection
2: Charging and anti-backflow without overcharge and overdischarge protection Lithium batteries must be used with corresponding protection boards
(Mobile phone batteries all have 3.7v protection, and 18650 batteries do not have 3.7v protection plates and cannot be used in series)
3: Pay attention to waterproofing and insulation
4: LED lamps cannot use boost drive
5: The battery voltage of the controller is the output voltage, unlimited current and voltage limiting.
3.2v LED lamp beads outside the battery cannot be used directly. It needs to be driven by a step-down constant current or a series current limiting resistor.
(Example: 1wLED lamp beads work requirements are 3v260ma, using 3.7v lithium battery, need to step-down drive or string more than 5 ohms power resistor to limit current)
Notice! LEDs cannot be driven by boost
If the light does not light when the solar panel is not connected to facilitate transportation or storage, you can remove the resistor r5 or manual switch
3.7v lithium battery can only use 5-7v solar panel maximum 30w lithium battery must have 3.7v protection plate
LED maximum output power 10w
7.4v lithium battery pack can only use 10-14v solar panel maximum 30w lithium battery must have 2 strings of special protection boards
LED maximum output power 20w
11.1v lithium battery pack can only use 18-22v solar panel with a maximum of 40w Lithium battery must be equipped with 3 strings of special protection boards LED maximum output power 40w
Package list:
Package A: Solar Controller*1
Package B: Solar Controller*1+Terminal*1
1: Connect the lithium battery
The battery must have a corresponding voltage protection board
2: Access LED
At this time, the LED is on (if it is not on, you can short T+T- to test)
3: Connect to the solar panel. At this time, the solar panel is illuminated with light, and the LED is turned off without light illumination.
Precautions:
1: The stable working output current of the control board cannot be greater than 3A, otherwise it may cause output protection
2: Charging and anti-backflow without overcharge and overdischarge protection Lithium batteries must be used with corresponding protection boards
(Mobile phone batteries all have 3.7v protection, and 18650 batteries do not have 3.7v protection plates and cannot be used in series)
3: Pay attention to waterproofing and insulation
4: LED lamps cannot use boost drive
5: The battery voltage of the controller is the output voltage, unlimited current and voltage limiting.
3.2v LED lamp beads outside the battery cannot be used directly. It needs to be driven by a step-down constant current or a series current limiting resistor.
(Example: 1wLED lamp beads work requirements are 3v260ma, using 3.7v lithium battery, need to step-down drive or string more than 5 ohms power resistor to limit current)
Notice! LEDs cannot be driven by boost
If the light does not light when the solar panel is not connected to facilitate transportation or storage, you can remove the resistor r5 or manual switch
3.7v lithium battery can only use 5-7v solar panel maximum 30w lithium battery must have 3.7v protection plate
LED maximum output power 10w
7.4v lithium battery pack can only use 10-14v solar panel maximum 30w lithium battery must have 2 strings of special protection boards
LED maximum output power 20w
11.1v lithium battery pack can only use 18-22v solar panel with a maximum of 40w Lithium battery must be equipped with 3 strings of special protection boards LED maximum output power 40w
Package list:
Package A: Solar Controller*1
Package B: Solar Controller*1+Terminal*1
Specifications
Key Features
Wiring:
1: Connect the lithium battery
The battery must have a corresponding voltage protection board
2: Access LED
At this time, the LED is on (if it is not on, you can short T+T- to test)
3: Connect to the solar panel. At this time, the solar panel is illuminated with light, and the LED is turned off without light illumination.
Precautions:
1: The stable working output current of the control board cannot be greater than 3A, otherwise it may cause output protection
2: Charging and anti-backflow without overcharge and overdischarge protection Lithium batteries must be used with corresponding protection boards
(Mobile phone batteries all have 3.7v protection, and 18650 batteries do not have 3.7v protection plates and cannot be used in series)
3: Pay attention to waterproofing and insulation
4: LED lamps cannot use boost drive
5: The battery voltage of the controller is the output voltage, unlimited current and voltage limiting.
3.2v LED lamp beads outside the battery cannot be used directly. It needs to be driven by a step-down constant current or a series current limiting resistor.
(Example: 1wLED lamp beads work requirements are 3v260ma, using 3.7v lithium battery, need to step-down drive or string more than 5 ohms power resistor to limit current)
Notice! LEDs cannot be driven by boost
If the light does not light when the solar panel is not connected to facilitate transportation or storage, you can remove the resistor r5 or manual switch
3.7v lithium battery can only use 5-7v solar panel maximum 30w lithium battery must have 3.7v protection plate
LED maximum output power 10w
7.4v lithium battery pack can only use 10-14v solar panel maximum 30w lithium battery must have 2 strings of special protection boards
LED maximum output power 20w
11.1v lithium battery pack can only use 18-22v solar panel with a maximum of 40w Lithium battery must be equipped with 3 strings of special protection boards LED maximum output power 40w
Package list:
Package A: Solar Controller*1
Package B: Solar Controller*1+Terminal*1
1: Connect the lithium battery
The battery must have a corresponding voltage protection board
2: Access LED
At this time, the LED is on (if it is not on, you can short T+T- to test)
3: Connect to the solar panel. At this time, the solar panel is illuminated with light, and the LED is turned off without light illumination.
Precautions:
1: The stable working output current of the control board cannot be greater than 3A, otherwise it may cause output protection
2: Charging and anti-backflow without overcharge and overdischarge protection Lithium batteries must be used with corresponding protection boards
(Mobile phone batteries all have 3.7v protection, and 18650 batteries do not have 3.7v protection plates and cannot be used in series)
3: Pay attention to waterproofing and insulation
4: LED lamps cannot use boost drive
5: The battery voltage of the controller is the output voltage, unlimited current and voltage limiting.
3.2v LED lamp beads outside the battery cannot be used directly. It needs to be driven by a step-down constant current or a series current limiting resistor.
(Example: 1wLED lamp beads work requirements are 3v260ma, using 3.7v lithium battery, need to step-down drive or string more than 5 ohms power resistor to limit current)
Notice! LEDs cannot be driven by boost
If the light does not light when the solar panel is not connected to facilitate transportation or storage, you can remove the resistor r5 or manual switch
3.7v lithium battery can only use 5-7v solar panel maximum 30w lithium battery must have 3.7v protection plate
LED maximum output power 10w
7.4v lithium battery pack can only use 10-14v solar panel maximum 30w lithium battery must have 2 strings of special protection boards
LED maximum output power 20w
11.1v lithium battery pack can only use 18-22v solar panel with a maximum of 40w Lithium battery must be equipped with 3 strings of special protection boards LED maximum output power 40w
Package list:
Package A: Solar Controller*1
Package B: Solar Controller*1+Terminal*1
What’s in the box
1x packages
Specifications
- SKU: GE779IP3TKZOLNAFAMZ
- Production Country: China
- Size (L x W x H cm): 20x10x20
- Weight (kg): 0.3
- Color: Without Terminals
- Main Material: other
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/31/0867572/1.jpg?7495)
Occkic Automatic Solar Panel Battery Charger Board Night Light LED Lamp Control Switch Garden Street light 3.7V 7.4V 11.1V Module
₦ 25,515
₦ 35,77529%
Questions about this product?
