JCD Electric Soldering 80W LCD Digital Display Adjustable

JCD Electric soldering 80W LCD Digital Display Adjustable temperature soldering tips 220V/110V Welding solder tools

Soldering Specifications:

Voltage: AC220-240V OR AC100-130V Power: 80W

Frequency: 50Hz/60Hz

Temperature Range: 180~500℃/356~932℉

Temperature Stability: ±5℃

Heating Type: Wmore Ceramics Element

Soldering Tips: 900M-B1.2 Wire Length: 1.4m / 55.12in

Soldering Size: Approx.242*25*25mm/9.6*0.98*0.98in

Soldering Weight: Approx.96g/3.4oz

Package Size: Approx. 254*55*35mm/10*2.2*1.4n

Package Weight: Approx. 139g / 4.9oz

Instruction:

Pre the (+) on once to increase 1°C; pre and hold it to increase temperature continuously.

Pre the (-) on once to reduce 1°C; pre and hold it to reduce

temperature continuously.

The newly set temperature will be saved ar 3 seconds,and will keep

the temperature for time powering-on.When (F) or (C) symbol flashes, it means the heating core has not reached the set temperature.

Temperature Calibration: 1.Ar 60 seconds of power on, put the soldering tip on a thermometer,and a moderate amount of solder on the soldering tip; make the test point and the soldering tip have good touch. 2. When thermometer displays a stable temperature (about 2 seconds),write down the temperature. 3. Move soldering away from thermometer; pre the (-) and (+) on at the same time to enter temperature Calibration. 4. Input adjustment quantity. Adjustment quantity=set temperature - measured temperature (see example) 5.Pre the (-) and (+) at the same time to exIt temperature interface, finished. Example 1, when setting temperature is 350°C while measured temperature is 342C, the correction steps are as follows: a.pre the (-) and (+) at the same time to enter temperature correction intertace. b. pre the (+) on till the LCD displays 8 C c.pre the (-) and (+) at the same time to exit temperature correction intertace Example 2, when setting temperature is 350°C while measured temperature is 330 C,the correction steps are as follows: a.pre the (-) and (+) at the same time to enter temperature correction interface. b.pre the (-) on till the LCD displays -20 C c.pre the (-) and (+) at the same time to exit temperature correction interface Parameter setting: 1. To pre the red and on both at the same time before it is power on, power on,ar the LCD is working, stop to pre the on, you will enter the setting menu. The LCD shows (F) or (C) 2. Pre the on to choose C(degree cende) or F(Fahrenheit).Pre the Red on to choose Element U10(01), U20(02), U30(03), U40(04). 3.Preing the (- ) and (+) at the same time to save your setting operation and quit the setting menu (finished) To protect the user from scald, when on the setting menu, it will stop heating. Failure warning indication The LCD shows (OP): the heating element is open circuit. Solution: 1.change the element.2. To confirm that whether the pin of element is oxidized. The LCD shows(E1) The outlet is poor contact, or the battery source interfering the soldering that it is power down. Solution: 1.Unplug the soldering .2. Close the interfering source. 3. To use it far away from the interfering source. Note: Please do not touch the soldering tip and tube when the power is turned on.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.