Electric Portable Plug-In Wall-Mounted Room Household Appliance Mini Household Radiator Remote 220V

Electric Portable Plug-In Wall-Mounted Room Household Appliance Mini Household Radiator Remote 220V

1. Power supply AC220-240V, 50Hz/60HZ2. Power on, heating and fan rotate, and work for 12 hours by default without preing any key;3. Pre the time key to switch to the timing setting, "old=pre the"+- "key to set the timing time; new=pre the time key to set the time", and then pre the time key to switch back to the temperature setting;4. The initial display temperature is 20 ℃. Pre the up and down keys to set the temperature. The range is 15~32 ℃; Set the timing for 1~12 hours under the time setting;5. Pre the fan key to switch between high (HH) and low (LL) fan speeds;6. When the set temperature is reached, cut off the heating, the fan will continue to work for 60 seconds and stop, and the screen will display OF. If the temperature is lower than the set temperature - 1, reheat;7. When the timing time is reached (the default is 12 hours if it is not set), the heating is cut off, the fan continues to work for 60 seconds and stops, and the screen displays OF;8. After finishing the work, pre any key to restart the work (if the timing is not set, the default is 12 hours)9. If the "natural wind" function is available, pre and hold the "+-" key for three seconds to start and display CC; Continue to pre and hold the "+-" key for three seconds to close, and the setting before "natural wind" is displayed