This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
In stock
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Door Delivery
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
Ranhang
100%Seller Score
8 Followers
Seller Performance
Order Fulfillment Rate: Excellent
Quality Score: Excellent
Customer Rating: Excellent
Product details
Please read the description before order!
the display of 50A meter is the same with 100A meter(is also use 100A display),just the shunts in differ!If you mind,please !
we have 5 chose:
100A meter with shunt,the 50A meter with shunt,only the 100A dispaly( not include shunt, 50A meter is also use 100A display,the same with 100A meter) ,only 100A shunt,and only the 50Ashunt!Choose what you want!
Please read the description before order!
the meter need to use with Shunts
NEW ARRRIVAL:
Features:
Note:
To use large inverter interference envment, such as: non-linear DC and frequent power outages, harmonic interference relatively large envment, you will burn table.
A.Function 1.Electrical parameter measurement function (voltage, current, active power, energy) 2.Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm). 3.The reset function of energy key. 4.Store data when power off. 5.Large-screen LCD (display voltage, current, active power, energy at the same time) 6.Backlight function. B.Appearance and Key function I. Display Interface Display interface is large screen LCD, it can display voltage, current, power, energy at the same time. II. Display format
Power: test range: 0~5kW
Within 1KW, the display format is 0.0~999.9W;
1KW and above, the display format is 1000~5000W.
Energy: test range: 0~9999kWh
Within 10KWh, the display format is 0~9999Wh;
10kWh and above, the display format is 10~9999kWh.
Voltage: test range: 6.5~100V
Display format: 6.50~99.99V
Current: test range: 0~100A (50A meter is 50A)
Display format: 0.00~100.00 (50A meter is 50A)
III. Key Backlight control Short pre the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off. Reset energy Step1: Long pre the key until the power display area display "CLr", then release the key. Step2: At this moment, the energy is flashing to prompt this is the energy reset state, if short pre the key again, then the energy value is cleared and exit the reset flashing state. Step 3: If there is no operation within 5 seconds, it means the energy value is not cleared and will exit the reset state. Set voltage alarm threshold
Step1: Long pre the key until the power display area display "SET", then release the key.
Step2: Ar enter this state, the voltage area display the current high voltage alarm value, the current area display the current low voltage alarm value and the last digit begin to flash, then you can short pre to plus 1, when there is no operation over 3 seconds, it will switch the digit position automatically, from the high voltage alarm value to the low voltage alarm value, there are total six digits, the range of the voltage alarm threshold is 6.5 ~ 99.9V;
Step3: Ar finish the setting, long pre the key until the screen display "PASS",that means you set succefully and will exit the setting state automatically.
C. Precautions 1. This module is suitable for indoor, please do not use outdoor. 2. Applied load should not exceed the rated voltage, current. 3. Wiring order can’t be wrong. D. Specification 1. Working voltage: 6.5 ~ 100VDC 2. Test voltage: 6.5 ~ 100VDC 3. Rated power: 50A/5000W 4. Measurement accuracy: 1.0 grade
Package Including:
due to what you chose
1) We accept , , TT. All major credit cards are accepted through secure payment proceor ESCROW.
2) Payment must be made within of order.
3) If you can't checkout immediately ar auction close, please wait for a few minutes and retry Payments must be completed within .
1. You have 7 days to contact us and 30 days to return it from the date parts received. If item is in your poeion is more than 7 days, it is considered used and or replacement will not be accepted. And customer should be responsible for all the charges of returning and reshipping.
2. All return it must be in its conditions, including box and acceories. Men made defects are not guaranteed, such as broken, scratched and so on, shipping tracking number, specific reason for the return, and your po#.
1.Buyer's early confirmation will be highly appreciated ar receiving the it.
2.Since your feedback is especially ant to our busine's development, we sincerely appreciate your positive feedback if you are satisfied with our product and service. 1 minute to you ,extremely vital significance to us.
3.Please contact us before leaving any negative or neutral feedback. We will try our best to solve any probl.Thanks for your understanding!
Welcome to our store--- UG International Supply Store
Thank you for choose UG. We Will Be No.1 In China! We are an honest seller on Aliexpre.
As a manufacturer of electronic module, UG have been in busine more than 20 years, and therefor have wide experience in all the line we handle.
To Be No.1 Supplier Of Electronic Module In China !
All our it from our factory are with high quality.
If you have any probl, we are very glad that you can contact us.We will try our best to help you.Hoping to establish a long term cooperation with you.
Always Imitated, But Never Surpaed In China.
If You Other Supplier Price Lower Than Us, Quality Than Us, Please Let Us Know, We Are Going To Beat Them!
OEM Service Also Welcome!
About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).
Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .
Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.
Specifications
Key Features
- DIY Supplies:ELECTRICAL
- Origin:Mainland China
- Accuracy Class:1.0
- Display Type:Digital Only
- Power Supply:DC
- Certification:None
- Item name:Large LCD Digital Combo Panel Meter Volt Amp Power Watt
- Power test range:0~5kW or 0~10kW
- Energy test range:0~9999kWh
- Voltage test range:6.5~100V
- Display format:6.50~99.99V
- Current test range:0~50A or 0~100A
- Operating frequency:45~65 hz
- Dimensions:89.6mm(W) x 49.6mm(H) x 24.4mm(D)
- OEM Service:Accpetable
- Package Listing:due to what you chose,please read descritpion
- Measuring Range:6.5~100VDC
What’s in the box
Specifications
- SKU: GE779IP3XK4QPNAFAMZ
- Model: RANdianyabiao2909
- Production Country: China
- Size (L x W x H cm): 10x8x6
- Weight (kg): 0.2
- Color: 100A display
- Main Material: PVC
Verified Customer Feedback
Customers who have bought this product have not yet posted comments