This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeAutomobileTools & EquipmentDiagnostic, Testing & Measuring ToolsCNC Latest V6 Anti-Roll 3D Touch Probe Edge Finder to
/product/32/8671352/1.jpg?1997)
/product/32/8671352/2.jpg?1997)
/product/32/8671352/3.jpg?1997)
/product/32/8671352/4.jpg?1997)
/product/32/8671352/5.jpg?1997)
/product/32/8671352/6.jpg?1997)
/product/32/8671352/7.jpg?1997)
/product/32/8671352/8.jpg?1997)
Share this product
₦ 99,516
₦ 181,11645%
1 units left
+ shipping from ₦ 17,665 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 17,665
Arriving at pickup station between 25 June & 01 July when you order within next 17hrs 41mins
Door Delivery
Delivery Fees ₦ 18,035
Ready for delivery between 25 June & 01 July when you order within next 17hrs 41mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
LCfang
66%Seller Score
160 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Excellent
Product details
Notice:Option (edge finder) for the whole set
How to distinguish the three wires?The red wire is VCC, the black wire is GND, and the white wire is IO.
Why is the concentricity different every time the probe is installed?Because your ER chuck spring clip cannot 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again.
So your chuck is AAA and above accuracy (concentricity less than equal 0.005), because many chucks in China have false standards, it is recommended to use a high-precision gauge or tungsten steel rod to check the table after installing the chuck. Look at concentricity. It's best to place the dial indicator at a distance of 50mm from the chuck, which is roughly the distance between the ball head of our probe and the root of the tool handle. Why am I obviously an AAA chuck, and the concentricity is still poor?That's because you bought a virtual label chuck.Under normal circumstances, if the spindle jumps by 0.01, the AAA chuck the milling cutter and the table tool holder, the error may not exceed 0.02, and the error may not exceed 0.03 at most. There will be a slight angular deviation between the center axis of the collet chuck and the center axis of the spindle, which will be magnified by the length of your tool holder.Usually you use a calibration meter to measure the root of a milling cutter, and you can't see a big error, but because the stylus of the probe is about 50mm from the tool holder, the error will be further magnified. Therefore, be to choose high-precision chucks, which is nothing more than a price difference of tens of .
Type:NO
Colour:As Shown
Material:Metal Package Contents:
1 * edge finder Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
How to distinguish the three wires?The red wire is VCC, the black wire is GND, and the white wire is IO.
Why is the concentricity different every time the probe is installed?Because your ER chuck spring clip cannot 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again.
So your chuck is AAA and above accuracy (concentricity less than equal 0.005), because many chucks in China have false standards, it is recommended to use a high-precision gauge or tungsten steel rod to check the table after installing the chuck. Look at concentricity. It's best to place the dial indicator at a distance of 50mm from the chuck, which is roughly the distance between the ball head of our probe and the root of the tool handle. Why am I obviously an AAA chuck, and the concentricity is still poor?That's because you bought a virtual label chuck.Under normal circumstances, if the spindle jumps by 0.01, the AAA chuck the milling cutter and the table tool holder, the error may not exceed 0.02, and the error may not exceed 0.03 at most. There will be a slight angular deviation between the center axis of the collet chuck and the center axis of the spindle, which will be magnified by the length of your tool holder.Usually you use a calibration meter to measure the root of a milling cutter, and you can't see a big error, but because the stylus of the probe is about 50mm from the tool holder, the error will be further magnified. Therefore, be to choose high-precision chucks, which is nothing more than a price difference of tens of .
Type:NO
Colour:As Shown
Material:Metal Package Contents:
1 * edge finder Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
Notice:Option (edge finder) for the whole set
How to distinguish the three wires?The red wire is VCC, the black wire is GND, and the white wire is IO.
Why is the concentricity different every time the probe is installed?Because your ER chuck spring clip cannot 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again.
So your chuck is AAA and above accuracy (concentricity less than equal 0.005), because many chucks in China have false standards, it is recommended to use a high-precision gauge or tungsten steel rod to check the table after installing the chuck. Look at concentricity. It's best to place the dial indicator at a distance of 50mm from the chuck, which is roughly the distance between the ball head of our probe and the root of the tool handle.
How to distinguish the three wires?The red wire is VCC, the black wire is GND, and the white wire is IO.
Why is the concentricity different every time the probe is installed?Because your ER chuck spring clip cannot 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again.
So your chuck is AAA and above accuracy (concentricity less than equal 0.005), because many chucks in China have false standards, it is recommended to use a high-precision gauge or tungsten steel rod to check the table after installing the chuck. Look at concentricity. It's best to place the dial indicator at a distance of 50mm from the chuck, which is roughly the distance between the ball head of our probe and the root of the tool handle.
Specifications
- SKU: GE779VP3UN5FJNAFAMZ
- Size (L x W x H cm): 11x6x3
- Weight (kg): 0.18
- Color: As Shown
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/32/8671352/1.jpg?1997)
CNC Latest V6 Anti-Roll 3D Touch Probe Edge Finder to
₦ 99,516
₦ 181,11645%
Questions about this product?
