Car Windshield Door Trim Sealant Black Butyl Rubber Headlight Reseal Retrofit

4M Car Windshield Door Trim Sealant Black Butyl Rubber Headlight Reseal Retrofit

Specifications:
Material: Synthetic Butyl Rubber
: Black
Length: Approx. 4m 13ft. (enough for re-sealing about two - four headlight assemblies.)
Thickness: Approx. 9mm 0.35''

How to use:
- After removing the cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil and grease.
- Release the sealant from the release paper and press it sufficiently around the pinch weld for a complete contact.
- When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the coupling part.
- The purpose of the sealer is to provide for a watertight seal. In cold weather conditions it is best to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.

Package included:
1 X Butyl Rubber Sealant







a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a