This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeAutomobileMotorcycle & PowersportsPartsWheels & TiresWheels & AccessoriesWheel Repair KitsCar Dent Repair Tools Body Repair Kit Vehicle Paintless
₦ 34,897
₦ 47,77327%
In stock
+ shipping from ₦ 6,357 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 6,357
Arriving at pickup station between 11 June & 17 June when you order within next 13hrs 56mins
Door Delivery
Delivery Fees ₦ 6,727
Ready for delivery between 11 June & 17 June when you order within next 13hrs 56mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
Hainan Tianfeng
100%Seller Score
4 Followers
Seller Performance
Order Fulfillment Rate: Excellent
Quality Score: Excellent
Product details
Packing lncluded:
Puller Kit (No Glue):1 * Puller, 18 * Tabs(Glue gun glue stick not included)
Features:
High quality.
It is made of aluminium alloy for strong strength and long durability.
Used as a adapter for slide hammer or pulling tap for easy catching and pulling.
A necessary component for dent repair, direct replacement for the broken one.
Easy installation, the thread size is M10 for better application.
Specification:
Material: Aluminum Alloy
Type: M10
How to use this paintless dent repair kits :
1.Clean the dent with a clean wet cloth
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is)
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth
Puller Kit (No Glue):1 * Puller, 18 * Tabs(Glue gun glue stick not included)
Features:
High quality.
It is made of aluminium alloy for strong strength and long durability.
Used as a adapter for slide hammer or pulling tap for easy catching and pulling.
A necessary component for dent repair, direct replacement for the broken one.
Easy installation, the thread size is M10 for better application.
Specification:
Material: Aluminum Alloy
Type: M10
How to use this paintless dent repair kits :
1.Clean the dent with a clean wet cloth
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is)
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth
Specifications
Key Features
- High quality.
- It is made of aluminium alloy for strong strength and long durability.
- Used as a adapter for slide hammer or pulling tap for easy catching and pulling.
- A necessary component for dent repair, direct replacement for the broken one.
- Easy installation, the thread size is M10 for better application.
Specifications
- SKU: GE779VP38BVOCNAFAMZ
- Model: n/a
- Weight (kg): 0.3
- Color: silver
- Main Material: metal
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
Car Dent Repair Tools Body Repair Kit Vehicle Paintless
₦ 34,897
₦ 47,77327%
Questions about this product?