BLE660C YDKB Keyboard Controller Board Bluetooth Wireless Master Control (Type C Interface) for FC660C

Wishcolor BLE660C YDKB Keyboard Controller Board Bluetooth Wirele Master Control (Type C Interface) for FC660C

Attention:This is not a keyboard, just the master control, you need to bring your own FC660C/FC980C keyboard.

Remind:

- It is a handmade item. Some parts are purely artificially soldered, and has flux residues. Users who do not know how to deal with them should purchase with caution.

- It requires users to have a certain amount of hands-on ability.

- When using your battery, please connect the positive and negative poles correctly. There are positive and negative labels next to the battery socket. When charging, please use a computer USB connection or a 5V charger.

Supported Models:

- FC660C: FC660C Various color versions of electrostatic s, including silent version

- Attention: This master does not support FC660M and FC980M, which are versions of MX mechanical axes.

Features:

- The whole modification does not require welding. Just screw the screw and pull out the cable to change the main control, which is very easy.

- USB and Bluetooth modes. It can switch between wired and Bluetooth when pluing in, and charging is also directly through the USB interface.

- USB supports full-key no-rush (can be switched by left and right Shift+N), supports any 6-key no-rush under Bluetooth.

- All key positions support customization, the function is based on tmk, and the [ydkb.io] graphical tool is used, which is simple and easy to understand.

- Also available, qmk-based that supports VIA. See [via.ydkb.io]

- Support automatic energy saving and fast wake-up. The Lock Mode can prevent the keys of the keyboard from g preed and consumed in the bag, ing it easier to carry.

- Most syst support power display (Mac requires third-party or text output).

- The indicator light function that comes with the keyboard supports cus

More Details:http://660c.ydkb.io

Package Included:- 1 x Master Control Board (Mini USB Interface)

Package Included:- 1 x Master Control Board (Type C Interface)

Package Included:- 1 x BLE980C Board- 1 x Cable- 2 x Anti-Slip PadsNote:- Battery is not included. 3.7V lithium battery is recommended.- Other it pictured are not included, for demonstion purposes only. Thank you for your understanding!

Charging:The data cable interface can be used for charging, and the charging will start when a cable is plued in.Installation:BLE660C Master Control for FC660C:1. For disaembly, please refer to:https://www.wstx.com/p-20543, first unscrew a screw on the back.2. From the back, you can clearly see some buckles, 4 on the top and bottom, it will be easier to remove with the stick below, or find a plastic card.

3. There are two screws on the main control. Unscrew the screws, remove the main control, and remove the keyboard cable.4. Put on a new master controller. When installing the BLE660C, it is recommended to plug in a battery and the keyboard cable first. Then install it on the housing to fix it. No matter what type of battery the BLE660C uses, install it as close to the top of the case as poible, so that there is more space.

5. This is what the 660C looks like after installation.

6. The usage of the attached double-sided tape is as follows (the keyboard in the picture below is for HHKB instead of 660C):

BLE980C Master Control for FC980C:

1. For dismantling, you can search for "FC980C dismantling" on the Internet. Note that there are three screws on the back, two of which are under the support feet.

2. You can clearly see some buckles from the back, 4 at the top and bottom. It will be easier to remove with the stick below, or find a plastic card.

3. There are two screws on the main control. Unscrew the screws, remove the main control, and remove the keyboard cable.

4. Put on a new master controller. The lower part of the picture below is what the BLE980C looks like after installation.

5. If the BLE980C uses a 1500mAh battery, it can be put down directly. It is not easy to fix it with double-sided tape, so use a bubble film pad on it, and then pre the keyboard after it is closed to ensure that it does not shake.

6. BLE980C can also choose a 3000mAh battery, you need to remove a stiffener from the keyboard as shown below.

7. Its switch will be a little higher than the bottom case. If you do not use foot support, it is recommended to attach the two 3mm non-slip foot pads provided at the bottom. In this way, when the table is l flat, the switch will not be preed.

Remind:Power switch: flip up to turn on and pre down to turn off. This switch is rarely used on a daily basis.Quick Instructions:Visithttp://660c.ydkb.iodirectly for more detailed help instructions.1. e sure the battery switch is on

To use Bluetooth when a USB cable is not plued in, first e sure the battery switch is on.After installation, the switch is located on the back, and the charging indicator is also behind this switch. It stays on when charging, and the brightne is very low or off when fully charged.

Note: This switch is on when flipped, and off when preed.

2. Pair keyboardKeyboard Bluetooth pairing is different from that of ma-produced Bluetooth keyboards. There is no need to pre a specific on to put the keyboard into pairing mode. As long as the power is normal and the keyboard is not connected, other devices can search for it and complete the pairing.Remind:For the pairing method of each system, and troubleshooting when encountering probl, please refer to the relevant sections inhttp://help.ydkb.io.3. Modify keyThe default keys are roughly the same as FC660C or FC980C. To modify the on again, the following is a brief description.Change key description:- Without DIP switches, the keys are modified by fing the .- All ons of this repment master can be customized, with a total of 8 layers. The richne of on settings is more abundant than that of the DIP. The set ons can be used normally under operating syst for Win, Mac, Linux, iOS and others.- Modify the on, open the website [ ydkb.io ], select the keyboard [ BLE660C or BLE980C ], and then there is a way to f on the page. For more detailed instructions, seehttp://help.ydkb.io.4. Energy Saving Mode Description:The keyboard automatically saves energy during daily use, and there is no need to turn off the battery switch when not in use. The power saving modes are described as follows:1. After the keyboard is idle for 3 seconds without preing any keys, it will enter the first level of energy saving. In this mode, the frequency of key is reduced, but the wake-up is very fast.2. If the keyboard is not connected to Bluetooth for 90 seconds, or is not used for 2.5 hours, it will enter the secondary energy saving. Pre and hold any key for 3 to 5 seconds to wake up.3. When using Lock Mode, it will directly enter the second level of energy saving. The difference from 2 is that at this time, only pre F and J at the same time and only long to wake up, other keys will not work.Attention:When waking up from the secondary energy saving (including Lock Mode), the on is always preed for a long time.Other Instructions:The new version of the master controller supports FC660C.BLE660C master board for FC660C

BLE980C master board for FC980C

The USB interface on the main control is Mini USB, which is used for FC660C. FC980C is still connected to the cable and uses the interface.BLE660C can also use the adapter board to change the interface to Type-C, and the Type-C interface needs to be modified.