Air Spray Coat Dump Sprayer Resin Fiber-reinforced

Features:

Professional Gelcoat Sprayer --- Ideal for spraying coat into open molds. Used for spraying -coat and resin. Special design achieve spray faster than conventional .

Easy Clean --- Come with 500cc wash bottle, cleaning up in just a few minutes. Which is labor saving and money saving then other Air Sprayer.

Ergonomic Design --- The body adopt adopt aluminum alloy with plastic cup, the spayer with handheld size and light weight, perfectly in your hand and without fatigue for long time spayer.

Premium Qality --- Sprayer body made of aluminum alloy with anti-rust coating with copper nozzle which is durable and longevity. Plastic cup easy clear and wear resist.

Wide Application --- This set is a profesional sprayer for gelcoat and resins, but also a good paint sprayer for other materials such as parting films, spray gypsum, tooling gelcoats. Which is a must for every fiberglass shop.



Specifications:

Material: Aluminum Alloy + Plastic

Product name: coat spray

Feed type: Gravity

Working pressure: 60-100 PSI

Nozzle size: 5.0mm

Air hose connection: 1/4 inch

hose connection: 3/8 inch

Product Application: Ideal for spraying coat, epoxy coat

Item Size: 26*25*12cm/10.2*9.8*4.7in

Item Weight: 1420g/50.1oz

Package Weight: 1500g/52.9oz

Package Size: 26*25*13cm/10.2*9.8*5.1in



Package List:

1 * Trigger

1 * Gas Flow Control Valves

1 * Housings

1 * Spring Hooks

1 * Nozzle (5mm)

2 * 1000ml Plastic Cups

1 * Metal Lid

1 * 500cc Wash Bottle



How to use:( Air compressor is no less than 5KG)

1 Preparation:

According to coat viscosity, select the appropriate nozzle diameter (nozzle type for selection 1-8 ( small to large, please buy seperat).

2 steps:

Cover the lid on the cup filled with raw materials, and pressed the lid.

The jet nozzle is inserted into the mouth of the force before the injection port until the nozzle is exposed.

Hold the grip, hold back the bolt, the air ejected from the jet port.

Note 1: In performing the above steps, the nozzle should always be up to prevent the nozzle leakage of material, will pour under the , ejected material, adjust the control valve, the raw material to achieve the best atomization, the muzzle aligned mold surface can be spray production.

Suggestion: When spraying, tips and the mold surface into a 90 -degree angle.

Note 2: In the injection process, remember not to point the nozzle themselves and others, in order to avoid accidental injury, when you stop spraying, will tip up.

When you release the bolt, so the raw material out of the with a cleaning solution, tips, feeding cups washed, coated with oil, to prepare for the next use.