6D 50*152cm Gloss Black Carbon Fibre Fiber Vinyl Car Wrap Air Release Film

Package included:
1x6D Carbon Fibre Film

Specifications:
Material: PVC sticker
Style : 6D highlight carbon fiber stickers
Size :500x1520mm
Type :Color Film
Series :Carbon Film

Descriptions:
Total length of all products is 1520mm Product color: Black points 6D Both are 3 layers (with protective film)
Common color: black
Interior Rearview mirror Computer Mobile phone Bicycle Motorcycle Car can be posted, furniture can also be posted
If you don鈥檛 like it, you鈥檒l be able to reveal it at any time without leaving adhesive residue and not affecting the car鈥檚 p/8 appearance.
Carbon fiber stickers not only have the advantages of waterproof, sun protection, smooth surface, strong extensibility and durability, but also have the advantages of convenient replacement. It is the choice of car lovers to decorate cars.
Layer 3 is a layer of protective film on the surface of the film to prevent scratching the film during construction, affecting the effect. Because the protective film is relatively thin, some folds may occur during production, but it does not affect the use.
The whole film is covered: no splicing, no seams, no traces, no air, no longer worry about air bubbles.
路Strong and tough: The film thickness is thinner, flexibility and ductility are stronger (any stretching after warming, no shrinkage after setting at normal temperature), ideal tortuousness on a small arc surface, and long lasting force;
路 Durable: environmental patience, not yellow, the service life of up to 4 years;
路Isolation corrosion: It can withstand most of the oil, grease, fuel, fat solvent, weak acid, weak alkali, weak salt, isolated from continuous damage such as acid rain, sand and bird droppings, and grease;
路Abrasion-resistant and scratch-resistant: The tenacity recovery force is increased by more than 10 times, and the small scratches are automatically bridged to resist general scratches, rubbing, and abrasion.
路Excellent filter: Refraction, filtering of harmful light, blocking glare, UV damage to the paint, protect the p/8 paint gloss and durability;
Insulation flame retardant: adapt to temperature difference -40 掳C to +90 掳C, good thermal insulation and inert temperature effect, flame retardant;
路 Fit: No wrinkles, no bubbles, no cracks, no warping;
路Convenient and convenient maintenance: reduce car washing and waxing man-hours and costs;
路 No adhesive residue: easy to post, easy to remove, do not hurt the paint, leaving no residue
路Environmental protection: It does not produce any toxic contamination on paint, human body and nature.


Instructions:
Dry stick
Suitable for car, motorcycle or small car
Use tools: clean rags, doctor blades or credit cards
1. Clean the car body's pasting position, conditionally use a cloth without fiber shedding, scrub with 50% alcohol or isopropyl alcohol or acetone, or use soapy water; the solvent-cleaned surface needs to be volatilized after the solvent is available. .
2, under normal circumstances, slowly side of the paste, while using a tool to scrape flat, while exposing the end of paper.
3, if the car length and width are less than 10 cm, you can tear off all the stickers and then paste. But be careful not to accidentally stick or fall off the floor and get dust.
4. Use a clean rag or blade [such as a telephone card or a credit card] to repeatedly rub or scrape the film repeatedly until there is no bubble in the car.
It is recommended not to expose to sunlight or wash the car within 24 hours.

Wet method
Suitable for cars or large vehicles (double operation recommended)
Use tools: watering can, clean rag, scraper, utility knifee, hair dryer
1, the need to paste the surface clean before preparing the paste paper, please spray the glass water evenly on the need to paste the surface (after cleaning the body, in the body part will be posted on the sprayer with water spray) - mainly used to reduce the viscosity of the sticker, Easy to adjust position.
2. After confirming the position to be affixed, lift the side with the car sticker from right to left [or from top to bottom] and place it on the car sheet with a rag, then apply it on the side while pressing it flat with a rag. Open the end of paper.
3, encounter the door handle or bumper bar according to the situation to cut the material and package or load off.
4, timely adjustments, after determining the general position of the figure is correct, scrape the water and air bubbles repeatedly with the scraper, when using the scraper, it will be scraped from right to left.
5. When the door and the sewing seam meet, use a utility knifee to divide it and put it inward.
6, as far as possible in the water inside the car to dry, there are conditions that can be moderately heated and dried with a hairdryer.
Suggestion: Avoid exposure within 24 hours and wash your car within 48 hours.