50cm T Puller Slide Hammer Dent Repair Lifter Removal Tool Panel Paintless

Description:
Size: Approx. 50x11.5/ 19.68 x 4.53
: Silver
Simple operation, quick repair dents
Free paint repair, do not destroy the paint, save money and environmental protection
Suitable for automotive surface sheet metal, refrigerator, washing machine surface sheet metal, a variety of flat metal concave place to use

Instructions:
1. Clean the dent with a clean wet cloth
2. Mount the stick into the ,pull the trigger to let the stick enter into the , connect the source and preheat for 5 minutes
3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is)
4. Pull the trigger and apply the drawing gasket with extruded (The 4 holes of gasket should be applied with hot melt )
5. Fast place the drawing gasket with hot melt at the center of dent, press lightly until the cures and adheres (Let the cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt , pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth

Package Included:
1 x Dent Repair Tool

More Details:



















a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a